RT45 (2013) Cub Cadet Tiller - Parts

This mounting bolt seals the fuel system and keeps the fuel bolt securely attached to the carburetor in a variety of gas-powered outdoor equipment. It is a genuine OEM part made of metal with dimensions of 0.25-20 x 0.875 inches. If you notice that the bolt is corroded or rusted, it will need to be replaced. A faulty or loose mounting bol...Read moret may cause fuel to leak, make it difficult to start or run your equipment engine, and may allow contaminants to enter the engine. The bolt is easy to install using a wrench or socket. Be careful not to overtighten the bolt as this may damage the fuel bowl. Each item is sold individually.

This cotter pin, also known as a bow tie cotter pin, is a genuine OEM part that is designed for use with lawn and garden equipment. Made of metal and measuring 1.875-inches long, this pin snaps into place and fits within shafts measuring 0.3125-inches to 0.375-inches. This pin can fall out due to vibrations or by being knocked off, so che...Read moreck your user manual for exact replacement of this pin. This part is sold individually.

This is an authentic replacement part manufactured for use with outdoor power equipment. The carburetor gasket is used to form a seal between the carburetor and the air intake box. It is recommended to replace gaskets when servicing the carburetor to ensure good seals when the parts are reassembled. This gasket is sold as an individual replacement part.

This manufacturer approved replacement item is made for use on lawn and garden equipment engines. Carburetor is designed to produce a combustible mixture of air and gas to send it to the engine. This kit includes a metal body carburetor and a plastic lever. Please note gaskets are sold separately. To replace this item you would need a sc...Read morerewdriver. • Remove the rear cover • Remove the old carburetor • Install the new carburetor • Re-assemble and test the unit

This genuine component is supplied directly from the original equipment manufacturer for use with Ryobi and MTD lawn and garden equipment. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hex washer screw. Ke...Read moreep in mind this high-quality part is made of durable metal and is sold individually.

This genuine part is a M6-1 x 12 Grade 8.8 mounting bolt that is zinc-plated. It is used to secure parts of your machine together, keeping these components tightly attached to each other so that they do not budge during operation. In lawn equipment, this bolt is usually used to attach the engine to the housing of the machine, but you may ...Read morealso find it in other areas of the machine. If the bolt rattles when you shake it, even when tightened, it is time to replace it. It must also be changed if it is corroded or bent, or else it may damage the components it is holding together. You will need to remove this mounting bolt with a socket wrench. This part is sold separately, so it is important to consult your user manual to understand how many bolts your machine needs. If you were initially replacing one bolt on your machine, you should consider purchasing more, as these bolts wear out at the same rate and you may end up needing to replace multiple bolts at once.

This Oil Seal has an OD of 1-3/4" and ID of 3/4". Installation of this OEM seal requires a screwdriver, pliers, socket set and wrench set, and is rated as being "Medium" difficulty by customers. This rubber seal attaches onto the drive shaft and prevents leaks between the drive shaft and transmission case. If broken due to wear/fatigue th...Read moreere will be a leak, and the part should be replaced. Refer to your make, model and diagram to ensure this part is correct for you.

A breather hose is used within the ventilation system for a crankcase, or engine, to connect the crankcase to the air manifold and allow hot air to escape. This genuine OEM breather hose is made of a high-quality rubber and is designed for use and compatible with several different makes and types of outdoor power equipment, such as lawnmo...Read morewers, tillers, engines, log splitters, and snowblowers. Due to the build material of this hose, it can break down over time and through exposure to gas, oil and excessive heat. If you notice any damage on the hose, fuel leaks or worsened engine performance resulting in rough idling or stalling, this hose may be damaged or simply need replacing. To replace this hose, locate the hose on your model and remove any clamps, before pulling off the old hose and installing the new, with any necessary hardware such as clamps.

This flange nut is sourced directly from the original equipment manufacturer. It is specially designed for use with riding lawn mowers and garden tractors. This is a standard hardware which may have multiple applications based on your tool. Please refer to the appropriate diagrams of your model for the exact location and the correct use o...Read moref this flange nut. It is made of high-quality metal and is sold individually. You would need a wrench to remove or install this component.

This is an authentic MTD replacement part. The fuel line kit is designed by the manufacturer for use in snowblowers. This part includes the rubber tube and two metal clamps, and is used to carry fuel through the machine. You will require pliers when replacing these items.

This is a genuine OEM replacement part that is intended to be used with tillers from Troy-Bilt, Yard Machines, MTD, and Cub Cadet. The plastic air cleaning housing attaches to the carburetor\\\'s air intake. This item is used to transfer air from the filter to the carburetor. This air cleaner housing is sold as an individual replacement part.

This is an authentic part that has been sourced from the original equipment manufacturer for be used with lawn and garden equipment. The part helps to support and guide the cable. It is an identical replacement for a missing or a damaged component that was installed on a new unit. Keep in mind this high-quality cable guide is sold as an individual item.