EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

RT25BKXAL00 Whirlpool Refrigerator - Instructions

All Instructions for the RT25BKXAL00
106 - 120 of 325

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Metal end cap on freezer door handle broke
2 of 3 people found this instruction helpful.
  • Annette Jones from Glendale, KY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Parts Select was easy to deal with -- had the item next morning after ordering! But Whirlpool should be ashamed -- this is the FOURTH time this part has had to be replaced in the 13 years we've had this refrigerator. Unrelated, but still a Whirlpool problem, the icemaker broke within 6 months -- had it repaired twice and then gave up. Will buy a different brand frig next time.
Was this helpful?
Thank you for voting!
Broke light switch while cleaning
2 of 3 people found this instruction helpful.
  • Gail from Golden, CO
  • Really Easy
  • Less than 15 mins
use kitchen knife to pry out. replaced switch assemble and pressed back into place. Could not have done this with out help from previous customers. Thanks
Was this helpful?
Thank you for voting!
refrigerator was overheating, condensor fan dead.
2 of 3 people found this instruction helpful.
  • David from Granada Hills, CA
  • Really Easy
  • 15 - 30 mins
First I removed all the screws from the back cover.
2nd removed fan nut and fan blade
3rd removed fan bracket
4th I traced wire to the condenser and disconnected wires from wire nuts.
Installed existing fan brackets to new motor kit
then reconnected wire nuts to new motor cord
Reinstalled fan nut and blade ,
reinstalled cover, plugged it in and BAM .WORKS PERF!
Was this helpful?
Thank you for voting!
The plastic water fill tube got cracked when we moved. I called a parts company and they told me they couldn't just sell me the tube I would have to buy a whole kit for about $50 dollars. I decided to glue the tube. It worked for a while then it started leaking. So I thought I would have to buy
3 of 6 people found this instruction helpful.
  • Joseph from Chesterfield, MO
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I hand screwed the fill tube into the water tube and stuck it into the freezer hole. I screwed the fill tube to the back of the refrigerator.

Thanks so much! You saved me a bundle!!
Was this helpful?
Thank you for voting!
Light rocker switch broke and refrigerator light couldn't go on.
2 of 4 people found this instruction helpful.
  • Cathy from HOPATCONG, NJ
  • Very Easy
  • Less than 15 mins
I just popped out the old switch with a flat head screwdriver. Removed the connections and then installed new switch by reversing steps. Popped in back in and the light went on.
Was this helpful?
Thank you for voting!
My refrigerator would not defrost.
1 person found this instruction helpful.
  • Eddie from BRONSTON, KY
  • Very Easy
  • Less than 15 mins
The first part I changed was the defrost timer but it did
not solve the problem, I replaced the bi-metal defrost sensor
and I have the same problem.

I can defrost by turning the clock manually and heater works.



























problem.
Was this helpful?
Thank you for voting!
Connection leaked as tube entered freezer
1 person found this instruction helpful.
  • Robert from MERRIMACK, NH
  • Very Easy
  • 15 - 30 mins
Followed video and had one problen, the metal pipe would not release as shown,so I used a hacksaw between the plastic and metal pipe, removing the metal pipe from inside as the video shows. Good instructions.
Was this helpful?
Thank you for voting!
One of the front wheels was broken in half.
1 person found this instruction helpful.
  • John from INNSBROOK, MO
  • Very Easy
  • 15 - 30 mins
  • Nutdriver
Very easy. Left the front of the refrigerator so it is approx. 4 inches of the floor. (used a two by four. Removed the screws (one for each roller). Removed the rollers and replaced with new rollers. Reinstalled the screws with secures the rollers to the refrigerator. Done
Was this helpful?
Thank you for voting!
door hinge broke.
2 of 4 people found this instruction helpful.
  • Bernard from DONALDSONVLLE, LA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Removed door and replaced bushing bracket was ok.
Was this helpful?
Thank you for voting!
Shelf studs broke several years ago and I had a problem locating them. Finally wised up and checked Part Direct and found them, ordered the kit w/ 12 pieces. Then quickly watched the installation video. Took less than 30 minutes to replace two different studs. Wife is very happy.
1 person found this instruction helpful.
  • Karl from BIRDSBORO, PA
  • Easy
  • 15 - 30 mins
  • Pliers
Simply took broken pieces of old stud out and replaced with the new ones. Used pliers to adjust them. Replace a freezer stud and a fridge stud.
Was this helpful?
Thank you for voting!
Light switch broke
2 of 4 people found this instruction helpful.
  • Carolee from Spokane Valley, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Pried out old part with screwdriver. Unplugged. When new part came, just plugged it in and pushed the part into place.
Was this helpful?
Thank you for voting!
The Light Socket Burned Out.
5 of 13 people found this instruction helpful.
  • MATTHEW from STOCKTON, CA
  • Really Easy
  • Less than 15 mins
I pulled the socket out and unplugged the wires. I replaced the light socket by plugging in the wires and snapping the light socket into place. A very simple fix.
Was this helpful?
Thank you for voting!
My wife broke the shelf support
1 person found this instruction helpful.
  • Hamid from Owasso, OK
  • Really Easy
  • Less than 15 mins
The new shelf support part fit perfectly. I needed no tools just slid it on the existing bracket. Super easy.
Was this helpful?
Thank you for voting!
A couple supports broke
2 of 4 people found this instruction helpful.
  • Michael from Cary, IL
  • Really Easy
  • Less than 15 mins
I simply slid off the broken supports, and slid the new ones on.
Was this helpful?
Thank you for voting!
Broken wheel on leveling roller
2 of 4 people found this instruction helpful.
  • Max from Jonesboro, AR
  • Really Easy
  • Less than 15 mins
  • Socket set
I removed one bolt and took out the old roller after first blocking up the fridge. Then I was puzzled for a moment because the hole in the new assembly was not tapped. But then I saw that the old bolt was a self tapping bolt. I used it to tap the hole then removed it and installed the new assembly. No sweat job.
Was this helpful?
Thank you for voting!
All Instructions for the RT25BKXAL00
106 - 120 of 325