EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

RT218JCD0 Frigidaire Refrigerator - Instructions

All Instructions for the RT218JCD0
31 - 45 of 146

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Freezer icing up and refrigerator section not cold
3 of 3 people found this instruction helpful.
  • Les from Fenton, MO
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Removed four screws for cover on refrigerator temperature controls, unpluged old timer and pluged in new timer. Replaced cover and screws.
Was this helpful?
Thank you for voting!
Old Defrost Timer Noisy During Operation
3 of 3 people found this instruction helpful.
  • Vernon from Granada Hills, CA
  • Easy
  • 15 - 30 mins
  • Socket set
First I removed the plastic grill (pulled out, no screws) from bottom of refrigerator, then I removed electrical plug & two screws from old timer (timer located on the front inside left lower side of refrigerator). Installed in reverse order.
Was this helpful?
Thank you for voting!
sometimes it would go into defrost and would not go back to cooling.
3 of 3 people found this instruction helpful.
  • Henry D from PETERSTOWN, WV
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
I called the repairman who diagnosed the problem as a thermostat then had to order a thermostat took about 2 weeks to get back and install (cost little over $100). did good for about two weeks and same problem reoccured. I decided it was defrost timer and ordered from this site for $19.95 including shipping. I got on ( you tube ) and got instructions(recommend you tube) for DIY install about 15 to 20 minutes. Has been running great for about 3 weeks. ( YOU TUBE IS GREAT FOR A DIY REPAIR ON ABOUT ANYTHING)
Was this helpful?
Thank you for voting!
defrost heater not working; defrost timer not rotating so coils ice up
3 of 3 people found this instruction helpful.
  • James from VOLANT, PA
  • Easy
  • 1- 2 hours
  • Nutdriver, Screw drivers
Checked for continuity in heater, defrost thermostat and defrost timer. Heater good; not sure about thermostat or timer. Replaced thermostat - no change. Replaced timer - rotating and heater working.
Was this helpful?
Thank you for voting!
Freezer frosted up, refrigerator compartment heated up
3 of 3 people found this instruction helpful.
  • James from Hanover, ME
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
I removed the housing at the top of the refrigerator compartment that contained the reefer light and temperature adjustment knob. This required a small nut-driver. Inside, I found the old defrost control, unplugged it, unscrewed it with a Phillips screwdriver, and replaced it with the replacement part. Then I replaced the housing to its o riginal position.
Was this helpful?
Thank you for voting!
Freezer too cold
3 of 3 people found this instruction helpful.
  • Curt from Maple Grove, MN
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Removed the housing with the light, 4 hexhead screws. This exposed the defrost timer, removed 2 hexhead screws, electrical connector and reassembled the unit.

Great resource and service, thank you.
Was this helpful?
Thank you for voting!
gasket was deformed; water condensed inside
4 of 7 people found this instruction helpful.
  • Thomas from Pittsburgh, PA
  • Easy
  • 15 - 30 mins
  • Screw drivers
a handyman made the repair. It went fine.
Was this helpful?
Thank you for voting!
Evaporator In Freezer Freezing Up, Fridge Warm
3 of 4 people found this instruction helpful.
  • DONALD from MECHANICSVILLE, MD
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Removed shelf brackets to allow the removal of the evaporator sheetmetal cover. Unpluged wires to thermostat ,removed defrost timer and plugged in new timer,(front left lower kick panel). Cut and resoldered wires to new thermostat reinstalled thermostat and cover in reverse order. I knew what parts I needed and how to repair the unit,ho wever your customer comments were spot on and would help anyone perform a successful repair (you provide a helpful service for the public)
Was this helpful?
Thank you for voting!
only freezer was cold, frig warm
3 of 4 people found this instruction helpful.
  • Edward from Middletown, DE
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers
removed all items from frig.. removed shelves, loosened one screw on each slide bracket and moved them down and out of the way of the rear panel....removed 6 screws in rear panel...removed all ice on coils with a heat gun...located defrost stat, replaced...crimped wires...re-installed rear panel and shelves! On left side of frig. in fro nt bottom..located defrost timer..removed trim piece, loosened 2 screws....removed and replaced defrost timer...plugged in the frig. and it started!!!!
Was this helpful?
Thank you for voting!
Water Was Leaking out of Refrigerator
3 of 4 people found this instruction helpful.
  • Julie from Douglaston, NY
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Socket set
Our old gasket was shot to hell, so we figured we'd replace it to see if that would solve the problem. We followed the instructions of another customer. We realized it was better if we removed the entire door in order to attach the gasket. That took a little doing, but it was totally the way to go. Miracle of Miracles, the leaking has s topped, the food is super cold, and I couldn't be happier.
Was this helpful?
Thank you for voting!
The refrigerator wasn't cold enough.
3 of 4 people found this instruction helpful.
  • John from San Diego, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I removed the plastic shroud on the ceiling of the refigerator, unscrewed and unplugged the old defrost timer, and replaced it with the new one. I reinstalled the shroud with the new timer installed.
Was this helpful?
Thank you for voting!
freezer colk, refrig warm
2 of 2 people found this instruction helpful.
  • Jeff from GLENDORA, CA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Followed the instructions provided in your video, took less than 15 minutes and works like new. Thank you for the parts and the advice.
Was this helpful?
Thank you for voting!
freezer was warm
2 of 2 people found this instruction helpful.
  • Carol from OSHKOSH, WI
  • Easy
  • 30 - 60 mins
  • Screw drivers
Top freezer took off the panel in freezer and melted the ice around coils and found the defrost thermostat and replaced with the new one. Just followed the instructions from your video on line. Freezer works just fine now. Refrigerator is 38 years old.
Was this helpful?
Thank you for voting!
Fridge not cooling
3 of 5 people found this instruction helpful.
  • WESTLEY from HATTIESBURG, MS
  • Easy
  • 15 - 30 mins
  • Nutdriver
My fridge side had warmed up to 70 degrees but the freezer side was still cold. The coils inside had iced up. After thawing with a hair dryer, it froze back after another week. I removed the old defrost thermostat and wired the heater strip directly and turned on the defrost timer. It began melting the ice so that ruled out the heate r strip being bad. I couldn't get a reading with my ohm meter on the defrost thermostat so I took a chance and bought the part. Installation was a breeze and it fixed the problem.
Was this helpful?
Thank you for voting!
Refrigerator was not cooling and the motor was running constantly
2 of 3 people found this instruction helpful.
  • Anil from Somerset, NJ
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
Having tried PartSelect.com before, I was very comfortable with the process. Input my symptoms and the feed back I received was that one of the 2 things (Defrost Timer or Defrost Thermostat)might need replacement. Since the cost was not much and over night shipping would cost more than the product, I decided to order both the parts. Chang ing parts was a breeze. The instructions posted by others on your web site were very easy to follow. You guys save me a bundle every time I have any thing going worng with any of my appliances.
Was this helpful?
Thank you for voting!
All Instructions for the RT218JCD0
31 - 45 of 146