My Orders
RST387 Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Old igniter lost power to ignite gas..
-
Blair from Florence, NJ
- Really Easy
- Less than 15 mins
-
Screw drivers
The first igniter was received broken. A replacement was received within 5 days. It was very easy to install once the protective cover was placed over the igniter end. In my opinion, this part should be sold with the protective cover already in place.
Was this helpful?
Thank you for voting!
Oven would not light.
-
George from UKIAH, CA
- Really Easy
- Less than 15 mins
-
Screw drivers, Socket set
Removed old igniter and replaced with new one.Tested oven and it went on. You need a phillips screwdriver to remove two screws and a small socket for the third screw to remove the igniter cage. Then pull out the wires from under the oven and disconnect. Reverse procedure to install new igniter. Reuse original connectors. Be very careful
... Read more
with the igniter because the tip is very fragile and can break easily.
Read less
Was this helpful?
Thank you for voting!
stove sometimes would not light or took really long and did not maintain heat
-
Patricia from Milwaukee, WI
- Really Easy
- 15 - 30 mins
-
Screw drivers
We unplugged the stove and turned off the gas. We slid the oven door off just to make it easier. Unscrewed 3 screws holding the igniter in place. Pulled the igniter out from the back of the stove. Disconnected the two wires. Slid the new igniter in the holder. Rewired it and slid it back into place. Put the screws back in and it wa
... Read more
s done. Plugged it back in, turned the gas on, tried it out and presto! It was perfect! Lit immediately and strong and now i have a brand new 20 year old stove. lol Happy girl! And this was done by 2 50 year old women!
Read less
Was this helpful?
Thank you for voting!
Broiler & burners worked, oven would not ignite or heat up.
-
Mary from Weston, CO
- Really Easy
- 15 - 30 mins
Roommate did the repair..so I don't know. I did the research online, the igniter solved the problem. Saved us buying a new oven!
Was this helpful?
Thank you for voting!
no ignition on right frt burner
-
CHARLES from CHICAGO, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
removed one screw lifted he brner took retainer off unpluged the igniter it had broken porcelen reversed the procedure everything worked fine
Was this helpful?
Thank you for voting!
Front burners would not light.
-
Jeffrey from Columbus, GA
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
First, unplugged the cooktop from outlet and shut off gas. Then, removed burner assembly then located and removed existing spark module. Installed new spark module kit, reassembled burner assembly and then plugged unit into electricity and turned gas on. Was rewarded when testing burners with an instant ignition.
Was this helpful?
Thank you for voting!
Door wouldnt shut evenly.
-
David from Westlake, OH
- Difficult
- 1- 2 hours
-
Screw drivers
Ordered hinge, went to Sears bought some tools to finish manufacturing the hinge, tapped out the screw hole, installed the hinge.
Was this helpful?
Thank you for voting!
Screws Were Rust6Ed, Melted
-
VICTOR from MOUNT PROSPECT, IL
- Difficult
- 1- 2 hours
-
Nutdriver, Pliers, Socket set, Wrench (Adjustable), Wrench set
Used grinder to cut the screws. All 4 screws had to be cut to remove from burner assembly. Once this was acomplised it went fast with no problems
Was this helpful?
Thank you for voting!