RST381 Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Wire Racks very old and very dirty
1 of 2 people
found this instruction helpful.
-
Paul from Belmont, MA
- Really Easy
- Less than 15 mins
I just replaced the racks with beautiful, new, shiny racks. My wife was very pleased
Was this helpful?
Thank you for voting!
burner head tip broke off due to improper re-install after removing to clean stove
2 of 5 people
found this instruction helpful.
-
Michael from New York, NY
- Really Easy
- Less than 15 mins
inserted new cap into correct contact hole carefully noting proper alignment. taking time and using enough light and corrective eye glasses.
the best part is that Parts Select provided great,friendly professional service on the phone and web and was able to ensure they had the part before shipping it. that's all I ask for.
thank ... Read more s.
the best part is that Parts Select provided great,friendly professional service on the phone and web and was able to ensure they had the part before shipping it. that's all I ask for.
thank ... Read more s.
Read less
Was this helpful?
Thank you for voting!
Replace oven racks
2 of 5 people
found this instruction helpful.
-
Gregory from Davenport, IA
- Really Easy
- Less than 15 mins
Very simple process of just ensuring you have the correct size racks and remove the old racks and replace them with the new ones.
Having ordered a lot of things on the internet, I am very pleased with using Part select and would "highly" recommend them to all!!
Having ordered a lot of things on the internet, I am very pleased with using Part select and would "highly" recommend them to all!!
Was this helpful?
Thank you for voting!
ignitor changed resistance so gas valve wouldn't operate
1 of 2 people
found this instruction helpful.
-
Trevor from Silverthorne, CO
- Really Easy
- 15 - 30 mins
-
Screw drivers
The first one came damaged and customer service credited the first one and got another on the way the same day. They were awesome to deal with. I removed the oven racks, the burner cover, the storage drawr, and the door. That took about 5 minutes. I removed 3 screws that held the ignitor in place. I removed the 2 wire nuts from the wires
... Read more
in the drawr space. I slid the ingitor cover off the old ignitor and onto the new one. Slid the new ignitor into place and fed the wires below and put on the 2 wire nuts, then installed the 3 screws and tested the operation. I put the oven back together and put the tools away. Total time about 20 minutes.
Read less
Was this helpful?
Thank you for voting!
Dishrack Tines were breaking off due to age
1 of 3 people
found this instruction helpful.
-
Keith from Dayton, TX
- Easy
- Less than 15 mins
The rack came with pictorial instructions which were fairly veg, however they were to the point. The wheels snapped into place easily, and the center water transfer tube twisted off the old one and twisted on the new one just fine. It is a very good idea to keep the old one out to look at as a guide. There were no instructions on how to r
... Read more
emove the transfer tube, I was lucky to have already worked on these before. After that it fits and works just peachy.
Read less
Was this helpful?
Thank you for voting!
broken hinge
1 of 3 people
found this instruction helpful.
-
Jed from Spanish Fork, UT
- Easy
- 15 - 30 mins
-
Screw drivers
The repair was quite easy. Remove the two screws and put in the new part. The only problem I had was the hinge sent was the wrong side (but it still worked) and the new hinge had no threads for the screws. I had to tap the holes so that the screws could be used.
Was this helpful?
Thank you for voting!
hinge on oven door broke off
2 of 6 people
found this instruction helpful.
-
Janine from Wilkes Barre, PA
- Very Difficult
- More than 2 hours
-
Screw drivers
After I received the new hinge in the mail, my 13 year old son volunteered, for a fee of five dollars, to put the new hinge on the oven door. Seeing "easy to install" on the outer wrapper of the new part, I thought I was being generous. However, my son soon let me know that the screws given with the new hinge did not fit into the predri
... Read more
lled holes of the oven. He tried and tried for over an hour to get those screws to fit. I decided to go to the home improvement store to buy bigger screws. I took the hinge with me and had the store employee assess the type of screws I would need. He then informed me that the screws were fine, but I needed the holes in the hinge to be drilled bigger. I bribed him by offering to buy him a drink if he'd do it for me as long as he was single. He laughed and drilled away. (Sometimes, single women, like me, get desperate!) He handed me the hinge with larger holes and I noticed the wedding ring. Oops...no drink for him!! But I did give him a great big thank you. Happily, I brought the fixed piece home and handed it to my son to continue with the repair. He tried again and this time announced the holes were drilled too big!! If there was a bridge nearby I seriously would have jumped! The next day I drove to my Dad's house...a true jack of all trades...and with his drill and two new screws, he said this should do it. For the third time, I handed the hinge to my son and VOILA!! It actually worked! Thanks Dad!! So much for "easy to install". Seriously, the incorrect screws were sent with this hinge! Anyway, I happily celebrated that night with a drink in my hand...minus the home improvement employee!
Read less
Was this helpful?
Thank you for voting!
Broken oven door hinges
0 of 1 people
found this instruction helpful.
-
James from Brookline, MA
- A Bit Difficult
- More than 2 hours
-
Screw drivers
Ordered a left & right hinge. Paid considerably more for the left hinge but both hinges were identical when received.
Bolt holes in both hinges were not tapped for the bolts which were sent with the hinges. This required a trip to the hardstore to get a tap set. After the bolt holds were tapped there was no problem removing the old ... Read more hinges and installing the new ones.
Bolt holes in both hinges were not tapped for the bolts which were sent with the hinges. This required a trip to the hardstore to get a tap set. After the bolt holds were tapped there was no problem removing the old ... Read more hinges and installing the new ones.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Burners would not light sometimes
1 of 4 people
found this instruction helpful.
-
Robert from St. Remy, NY
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Slide stove out unplug remove cover on back bottom left 3 screws remove wires from old module and plug into new module could not remove old module I glued new to old replaced cover pluged back in slide stove back in and the burners lit
Was this helpful?
Thank you for voting!
The burner would not light but the ignitor lite up fine.
0 of 1 people
found this instruction helpful.
-
Tom from West Allis, WI
- Easy
- 15 - 30 mins
-
Screw drivers
I found the ignitor was wired in series with the gas valve and wasn't letting enough voltage through to the gas valve to open it. I just unscrewed the ignitor and pulled it out.
Was this helpful?
Thank you for voting!
We needed a new bottom dishrack the old one was very rusty
1 of 4 people
found this instruction helpful.
-
Katherine from Coos Bay, OR
- Really Easy
- 15 - 30 mins
I ordered a new rack, snapped the stuff together, and slid the old one out and the new one in. Fit beautifully. Piece of cake and much cheaper than a new dishwasher.
Was this helpful?
Thank you for voting!
The oven was not heating properly
0 of 1 people
found this instruction helpful.
-
Douglas from Aurora, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
After removing the oven shelves, the burner cover came right up. The ignitor was in plain sight, and after removing the screws I pulled it straight out so I could get to the wire nuts. After swapping out the old igniter and sliding the cover over the new ignitor, the new piece slipped back into place in the oven. The screws were put bac
... Read more
k in, and the burner cover and shelves put back, and the oven works wonderfully again.
Read less
Was this helpful?
Thank you for voting!
Installed wheel assemblies to rack
0 of 2 people
found this instruction helpful.
-
Philip from Greene, ME
- Easy
- Less than 15 mins
Assemblies snap on, no tools needed
Was this helpful?
Thank you for voting!
the oven would not light
0 of 2 people
found this instruction helpful.
-
Kathy from Arlington, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
unscrewed the bracket holding the igniter in place then we pulled the drawer on the bottom out and disconnected the Igniter - then we took the unit out of the bracket replaced it and then put the bracket back into place screwed it in and reconnected the igniter and now it burns hotter then it has since we moved into the house two years ag
... Read more
o.
I was worried that it would be a hard long job but was pleasantly surprised when it only took a few minutes.
I was worried that it would be a hard long job but was pleasantly surprised when it only took a few minutes.
Read less
Was this helpful?
Thank you for voting!
Oven would not ignite
0 of 2 people
found this instruction helpful.
-
Ronald from Dedham, MA
- Easy
- 15 - 30 mins
-
Screw drivers
First I turned off the gas supply to the oven and disconnected it. I then pull the oven out away from the wall. I then unplugged the power cord. I removed the oven door by lifting it off of it spring hinges. I then removed a lower plate that covers the burner element by pressing in a manner that it popped off. I then located the igni
... Read more
tor and removed 3 screws. All were easily removed. Carefully, I pulled the igniter out and removed the wires from the wires that supplied the current to the ignitor. Installation followed by working the steps above in reverse order.
Read less
Was this helpful?
Thank you for voting!