My Orders
RSD307 Caloric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Screws Were Rust6Ed, Melted
-
VICTOR from MOUNT PROSPECT, IL
- Difficult
- 1- 2 hours
-
Nutdriver, Pliers, Socket set, Wrench (Adjustable), Wrench set
Used grinder to cut the screws. All 4 screws had to be cut to remove from burner assembly. Once this was acomplised it went fast with no problems
Was this helpful?
Thank you for voting!
Oven door hinge broken
-
Sherry from Mountain Ranch, CA
- Really Easy
- 30 - 60 mins
-
Screw drivers
Discriptions provided by others in this section made it easy and there is little additional insight I can add. The part was delivered the next day. I don't reply to these requests for comments, as providing what I paid for is the expectation. But, this outfit did a good job.
Was this helpful?
Thank you for voting!
Oven no longer came on
-
jeffry from Sussex, NJ
- Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
Replaced the igniter. Took out the 20 screws holding the bottom plate of the oven. Removed the igniter and gas tube mounting screws and bracket. Took off the wire nuts that attached igniter to stove wiring. Carefully installed new ignitor, using reverse of the steps above. Igniter tip is very fragile, so beware as you handle. All
... Read more
went very well, and oven now works like a charm
Read less
Was this helpful?
Thank you for voting!