My Orders
RLB-382 Maytag Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
electric ignite gas stove kept clicking the ignitor unless unplugged from electrical outlet
10 of 11 people
found this instruction helpful.
-
Diana from Jacksonville, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
I removed the 2 screws that held the housing on at the back of the stove. Then I removed the 2 screws that held the module to the back of the stove. Since I am not an experienced electrical person (I am a female nurse in the operating room), I unplugged 1 wire at a time from the old module and plugged it into the new module. I repeated th
... Read more
is step with each wire to make sure I didn't put the wrong wire on a wrong spot until I had all the wires to the new module. Then reattached the screws, plugged in the oven and presto, it works just fine! Was amazed at how easy it was. A 50 dollar part instead of a new 1500 dollar stove. How easy is that?
Read less
Was this helpful?
Thank you for voting!
Needed to replace the 4 chrome bowl liners on our Glenwood Gas stove
3 of 11 people
found this instruction helpful.
-
STEVEN from MARSHFIELD, MA
- Really Easy
- Less than 15 mins
It was straight forward to find the part which could be identified by picture and detailed dimensional description. Very easy to throw out the old rotten liners and replace them with the parts sent.
Was this helpful?
Thank you for voting!