Models > RGH647GEJ2 > Instructions

RGH647GEJ2 Hotpoint Range - Instructions

All Instructions for the RGH647GEJ2
1 - 15 of 22
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Gas stove knob was broken
The stove is over 20 years old, it was bound to happen. Because PartSelect.com has pictures of the part from three different views & detailed measurements, I was more confident that this part would be what I would need. When the part arrived in just 2-3 days, I opened the package, and slipped it into the socket... DONE ....Easy!!
Parts Used:
Gas Surface Unit Control Knob
  • Winnie from New York, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
13 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven not up to temperature; shuts off before temp set
Took amp reading, which was 2.5 amps, that identified that the igniter needed to be replaced, for the safety valve requires 3.2 amps or better. Replaced, and everything is okay.
Parts Used:
Flat Style Oven Igniter with Wire Harness and Bracket
  • Maurice from Overland Park, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old knob cracked, duh, after 20+ yrs!
Opened the package. Took out the knob. Put knob on spindle. The neat thing is it's an EXACT match! No bushings or adapters needed. No color difference; all the markings are identical. YAY!! I will be back, as all my appliances are aging sharply!
Parts Used:
Gas Surface Unit Control Knob
  • Vicjki from Houston, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
stove is old and control knobs break
just pushed on the new control knob, no tools it was quick and eacy with the right part
Parts Used:
Gas Surface Unit Control Knob
  • john noel from simi valley, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Igniter
No problem getting to igniter in oven to remove from holder. Difficult to disconnect igniter at rear after removing drawer. Just hard to get to. Broke one of the plug-in receivers so had to crimp on a new one. This was a hinged pair that received the igniter lead and another lead that went to another part.
Parts Used:
Flat Style Oven Igniter with Wire Harness and Bracket
  • GENE from HEBRON, OH
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacing old drip pans
Our very old GE gas stove looked good except for the drip pans. I ordered all four and they arrived the next day. The price for the pans was very reasonable, and of course, they were very easy to replace. My wife looked at the stove and said the stove looked new. I love those inexpensive jobs that result in a good looking finished project.
Parts Used:
Drip Pan
  • Fred from Avon, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven Igniter DEAD
First wrote a wiring diagram then disconnected old igniter by removing two screws and unplugging.
Then just reversed the whole operation.
However, it never worked because the "oven/broiler" switch broke.
Its time for a new stove.
But I would recommend PartsSelect to anybody.
Your selection is great, you shipped as promised, and the best part was the price.
Parts Used:
Flat Style Oven Igniter with Wire Harness and Bracket
  • Steve from Flanders, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
remove and replace
very easy remove the bad bulb install the new one
Parts Used:
Fluorescent Lamp/Bulb
  • Perry from Flushing, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
10 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner would not light
Ordered new igniter switch, but Fedex lost it! Partselect sent new one overnight. Really a cinch to install. Be sure to unplug oven or turn off breaker if you are not comfortable with working with live electrical wires!
Parts Used:
Ignition Switch
  • Gary from Riverside, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
numbers on knob were no longer visible
Replace knob and it was an exact fit. It feels like I have a new oven now that I can set an accurate temperature. The part came in 2 days even though it was standard shipping
Parts Used:
Thermostat Knob
  • Debra from Decatur, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
timer knobs missing
Just pushed the new timer knobs onto the stem. They fit and now I can set the oven timer without having to use a pair of pliers to grip the stem and turn it.

Two of the knobs fit perfectly.

The stem for the the clock was broken off and there was not enough of the stem left for the new knob to fit.
Parts Used:
Clock Knob Kit - 3 Pack - Chrome
  • Doris from Redwood City, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
5 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
inside Control Knob broke off
took off the old knob replace it with the new knob
Parts Used:
Gas Surface Unit Control Knob
  • Jeanne from White Plains, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The original top burner control knob broke off
The repair in my situation is very easy and simple. Just push new control knob into the valve and it's done. I am pleased with my order and I received it sooner than I expected.
Parts Used:
Gas Surface Unit Control Knob
  • Eric from Diamond Bar, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob was broken
Changed the knob. Just like that, it worked like a charm.
Parts Used:
Gas Surface Unit Control Knob
  • Robert from Boston, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The tube on the old knob snapped.
The new knob was the exact part. It slipped right on.
Parts Used:
Gas Surface Unit Control Knob
  • Judy from Springfield, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the RGH647GEJ2
1 - 15 of 22
Back to Top