Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Taupe/gray stove grates stained/discolored
31 of 32 peoplefound this instruction helpful.
Lee from N. Merrick, NY
Really Easy
Less than 15 mins
I could not get these grates clean, so I called Partselect and they helped me find the model of the same stove that had black grates, drip pans, and burner caps. I ordered the black grates one afternoon, and without paying for expedited shipping, they arrived the next day! They were in original GE boxes (since they make Hotpoint). I am
... Read more happy about the whole experience.
Read less
Was this helpful?
Thank you for voting!
Oven rack missing when I purchased the house
18 of 28 peoplefound this instruction helpful.
Patricia from Houston, TX
Really Easy
Less than 15 mins
I was very pleased with how quickly the new oven rack arrived and it was a perfect fit. Thanks.
Was this helpful?
Thank you for voting!
the oven handle broke during delivery
15 of 19 peoplefound this instruction helpful.
william from new orleans, LA
Easy
Less than 15 mins
Nutdriver, Screw drivers
I remove the damage handle from the oven door,Then i install the new door handle with no problem.The tools i used was a hand nut driver and a phillip #3driver.
Was this helpful?
Thank you for voting!
Interior light needed replaced
22 of 46 peoplefound this instruction helpful.
Leo from TWIN FALLS, ID
Really Easy
Less than 15 mins
Nutdriver
Unplugged the appliance for safety. Removed two 1/4" screws that held the assembly in place. Carefully removed the wire guard that retains the glass shield. Unscrewed old light bulb and replaced with new part. Reversed the steps after cleaning glass cover.
Was this helpful?
Thank you for voting!
Needed extra oven space
11 of 15 peoplefound this instruction helpful.
noreen from flushing, NY
Really Easy
Less than 15 mins
Thanksgiving was coming and I needed extra oven space. So I ordered an additional rack. Installation ... just put it in the oven. My part came the day after I ordered it.
Was this helpful?
Thank you for voting!
Twice I ordered the oven light bulb & each time the light bulb was defected
17 of 37 peoplefound this instruction helpful.
Barbara from BELLEVUE, WA
Very Difficult
Less than 15 mins
I had to call for a appointment for repair with GE Appliance because I thought then it . .was something electrical. The technician came out & checked everything out, turned out it was not electrical, The technician went out to his truck got a light bulb from his truck, put it in & it worked. It cost me $121.00 for trip charge from GE appl
... Read moreiance for a light bulb that worked, your light bulbs were defective twice. Very disappointed with your products, cost me alot of money for a good light bulb thru GE appliance
Read less
Was this helpful?
Thank you for voting!
oven stoped working
9 of 13 peoplefound this instruction helpful.
Cheskel from Brooklyn, NY
A Bit Difficult
30 - 60 mins
Screw drivers
Removed top part of oven (control panel )replaced control. The new control had different knob so it was a little a surprise got a little upset with company after this but in the end got it fixed by using some tricks of mine
Was this helpful?
Thank you for voting!
Oven didn't work properly - stopped preheating, the started on its own when turned off
4 of 4 peoplefound this instruction helpful.
Michael from MARQUETTE, MI
A Bit Difficult
30 - 60 mins
Pliers, Wrench (Adjustable)
The part is not an exact replacement for the original. But it does fit perfectly. The electric connections are in different places, but they are marked (and so was the original), so that was easy enough. Part has a different look compared to original, but once installed, it is fine. Hardest part was figuring out how to take apart the
... Read morecontrol panel. New part solved all our problems. Make sure you order the new knob. The shaft is different, so your original knob will not work.
removed grills that pots sit on. Removed metal disc's from flame dispensing positions. Removed old left and right pan units. Placed with new pan units. Put metal disc's back in place. Put grills back in place.
slid the old ones out and slid the new ones in. done
Was this helpful?
Thank you for voting!
couldn't set clock or turn oven on
3 of 4 peoplefound this instruction helpful.
michael from mount prospect, IL
Really Easy
15 - 30 mins
Nutdriver
removed 4 screws in the back to access circuit board.unplugged connector and four wires.removed 4 screws that held circuit board.installed new board and reverse procedures
Was this helpful?
Thank you for voting!
oven racks very old and writing on knobs worn ff
2 of 2 peoplefound this instruction helpful.
Patricia from SAN JOSE, CA
Very Easy
Less than 15 mins
Very was ti replace racks and knobs. Very fast mail service
Was this helpful?
Thank you for voting!
lights blown out
6 of 14 peoplefound this instruction helpful.
Gerald from WINTERVILLE, GA
Very Easy
Less than 15 mins
replaced lights in refrigirator and freezer
Was this helpful?
Thank you for voting!
Grate Size
2 of 2 peoplefound this instruction helpful.
Clyde from ALLEGAN, MI
Really Easy
Less than 15 mins
The grates are slightly smaller then the original Kenmore parts and they slide slightly. I purchased a full set of 4 grates - part number PS244182
My Orders
