- Home
- RGB745BEA3AD
- Instructions
RGB745BEA3AD Hotpoint Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Taupe/gray stove grates stained/discolored
31 of 32 people
found this instruction helpful.
-
Lee from N. Merrick, NY
- Really Easy
- Less than 15 mins
I could not get these grates clean, so I called Partselect and they helped me find the model of the same stove that had black grates, drip pans, and burner caps. I ordered the black grates one afternoon, and without paying for expedited shipping, they arrived the next day! They were in original GE boxes (since they make Hotpoint). I am
... Read more
happy about the whole experience.
Read less
Was this helpful?
Thank you for voting!
Oven rack missing when I purchased the house
18 of 28 people
found this instruction helpful.
-
Patricia from Houston, TX
- Really Easy
- Less than 15 mins
I was very pleased with how quickly the new oven rack arrived and it was a perfect fit. Thanks.
Was this helpful?
Thank you for voting!
Interior light needed replaced
22 of 46 people
found this instruction helpful.
-
Leo from TWIN FALLS, ID
- Really Easy
- Less than 15 mins
-
Nutdriver
Unplugged the appliance for safety. Removed two 1/4" screws that held the assembly in place. Carefully removed the wire guard that retains the glass shield. Unscrewed old light bulb and replaced with new part. Reversed the steps after cleaning glass cover.
Was this helpful?
Thank you for voting!
Needed extra oven space
11 of 15 people
found this instruction helpful.
-
noreen from flushing, NY
- Really Easy
- Less than 15 mins
Thanksgiving was coming and I needed extra oven space. So I ordered an additional rack. Installation ... just put it in the oven. My part came the day after I ordered it.
Was this helpful?
Thank you for voting!
Twice I ordered the oven light bulb & each time the light bulb was defected
17 of 37 people
found this instruction helpful.
-
Barbara from BELLEVUE, WA
- Very Difficult
- Less than 15 mins
I had to call for a appointment for repair with GE Appliance because I thought then it . .was something electrical. The technician came out & checked everything out, turned out it was not electrical, The technician went out to his truck got a light bulb from his truck, put it in & it worked. It cost me $121.00 for trip charge from GE appl
... Read more
iance for a light bulb that worked, your light bulbs were defective twice. Very disappointed with your products, cost me alot of money for a good light bulb thru GE appliance
Read less
Was this helpful?
Thank you for voting!
pan units were in bad shape.
4 of 5 people
found this instruction helpful.
-
stephen from tuxedo, NY
- Really Easy
- Less than 15 mins
removed grills that pots sit on. Removed metal disc's from flame dispensing positions. Removed old left and right pan units. Placed with new pan units. Put metal disc's back in place. Put grills back in place.
Other Parts Used:
Was this helpful?
Thank you for voting!
old blackened oven racks
8 of 17 people
found this instruction helpful.
-
Roger from Falls Church, VA
- Really Easy
- Less than 15 mins
Replaced old with new.
Was this helpful?
Thank you for voting!
none
3 of 3 people
found this instruction helpful.
-
Michael from Laughlin, NV
- Very Easy
- Less than 15 mins
slid the old ones out and slid the new ones in. done
Was this helpful?
Thank you for voting!
lights blown out
6 of 14 people
found this instruction helpful.
-
Gerald from WINTERVILLE, GA
- Very Easy
- Less than 15 mins
replaced lights in refrigirator and freezer
Was this helpful?
Thank you for voting!
oven racks very old and writing on knobs worn ff
2 of 2 people
found this instruction helpful.
-
Patricia from SAN JOSE, CA
- Very Easy
- Less than 15 mins
Very was ti replace racks and knobs. Very fast mail service
Was this helpful?
Thank you for voting!
door handle and end caps broke
2 of 2 people
found this instruction helpful.
-
Jack from BARTLETT, TN
- Very Difficult
- More than 2 hours
parts need to be delivered to do repair, its been over a month. customer service is not taking calls. I have paid for parts I did not receive.
Was this helpful?
Thank you for voting!
Grate Size
2 of 2 people
found this instruction helpful.
-
Clyde from ALLEGAN, MI
- Really Easy
- Less than 15 mins
The grates are slightly smaller then the original Kenmore parts and they slide slightly. I purchased a full set of 4 grates - part number PS244182
Was this helpful?
Thank you for voting!
The light inside the oven had burned out
3 of 7 people
found this instruction helpful.
-
Catherine from SEATTLE, WA
- Very Easy
- Less than 15 mins
0. As a safety precaution, unplug the range or hit the relevant fuse breaker before you start. You might also want to grab a flashlight. Definitely do not try to do this while the oven is hot.
1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back.
2. Pop off the hemispherical glass cap.
... Read more />3. Unscrew the old light bulb, and screw the new light bulb in its place.
4. Put the cap back.
5. Secure the cap by putting the wire back in its slots on the cap.
No tools needed, the cap is just held in place with pressure from the wire.
1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back.
2. Pop off the hemispherical glass cap.
... Read more />3. Unscrew the old light bulb, and screw the new light bulb in its place.
4. Put the cap back.
5. Secure the cap by putting the wire back in its slots on the cap.
No tools needed, the cap is just held in place with pressure from the wire.
Read less
Was this helpful?
Thank you for voting!
drip pans that were uncleanable
2 of 4 people
found this instruction helpful.
-
jeff from perrysburg, OH
- Really Easy
- Less than 15 mins
remove grates and ceramic discs replace old pans with new ones. looks as good as new.
Other Parts Used:
Was this helpful?
Thank you for voting!
some of electrodes not working at times,found were bad,wires had some insulation missing, clips looked burnt,found all new parts replaced
1 person
found this instruction helpful.
-
Dana from LEEDS, AL
- Really Easy
- More than 2 hours
-
Pliers
the electrodes on this model have to be removed before you can raise cooktop, once cooktop is raised remove wire from burner bracket, use needle nose pliers to squeeze bottom of clip,remove &replace with new parts.
Was this helpful?
Thank you for voting!