My Orders
- Home
- RGB508PPT1WH
- Instructions
RGB508PPT1WH Hotpoint Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Burners were not burning properly
0 of 2 people
found this instruction helpful.
-
Judy from Payson, AZ
- Really Easy
- Less than 15 mins
Just removed the old and set in the new. Waalaa. All is well now. The web site, ordering, shipping and all was super easy.
Thank you
Thank you
Was this helpful?
Thank you for voting!
The double burner assembly had years of gunk so the burn was not clean.
0 of 2 people
found this instruction helpful.
-
Larry from Forestville, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
The old double burners lifted off. Before the new burner could be set down into place, the area had to be completely cleaned using a flat blade screwdriver and damp rag. This allowed the new burners to seat properly in place. That is it.
Was this helpful?
Thank you for voting!
Back burner not working
0 of 3 people
found this instruction helpful.
-
albert from La Veta, CO
- Really Easy
- Less than 15 mins
Lift stove top, rest it on the pop out holders on stove.
Take old double burner out, Make sure gas port is not plugged.
Put new burner in its place. Make sure it is solid, if not use the washers sent with new burner. turn on gas to burner, to see if it works. Close stove top an wa la!
The bride is happy.;-]
Take old double burner out, Make sure gas port is not plugged.
Put new burner in its place. Make sure it is solid, if not use the washers sent with new burner. turn on gas to burner, to see if it works. Close stove top an wa la!
The bride is happy.;-]
Was this helpful?
Thank you for voting!
Stove burners no longer working
-
Tamyra from Friendship, WI
- Really Easy
- Less than 15 mins
Ordered 4 new burners, snapped the old ones out, put the new ones in and my stove works great. Also, I got my parts in 1 day. Very satisfied with my experience with PartSelect.
Was this helpful?
Thank you for voting!
One burner wouldn't light
-
Norton from Malta, NY
- Really Easy
- Less than 15 mins
Removed old and set inserted new
Was this helpful?
Thank you for voting!
gas flame flared and blackened pots; gas jets clogged
-
Patricia A from Newport, NH
- Really Easy
- Less than 15 mins
raised the range top so the supports locked in place. carefully lifted off the old burner assemblies. used a paper towel to remove any black soot from gas jets. opened the plastic package of the new burner assemblies, pulled out the new parts and carefully put them in place. turned on the flame to test... took less than 5 minutes to fix a
... Read more
problem that's been annoying for 3 years!!
Read less
Was this helpful?
Thank you for voting!
3 of 4 Burners would not light
-
David from Cincinnati, OH
- Really Easy
- Less than 15 mins
Open the stove top pulled old burners out dropped new set in place. Theyclick right in NO TOOLS REQUIRED!!!!
Was this helpful?
Thank you for voting!
Old bottom oven was really crusted and way too hard to clean.
-
Vincent from Aldan, PA
- Really Easy
- Less than 15 mins
-
Nutdriver
Removed oven door.Opened slightly and lifted off.Removed two screws from rear of oven bottom.Lifted out bottom oven.Reversed for installing new bottom. Looks great.And the price was well worthit.
Was this helpful?
Thank you for voting!
right side burns would not light, if they did it wrapped around outside of burner unit
-
Charmaine M from York, PA
- Really Easy
- Less than 15 mins
Pulled old burners out, cleaned area, sat new units in place, made sure they were stable(no rocking), put the top down on the stove and all burners light like new!!
Was this helpful?
Thank you for voting!
both burners were bad
-
JOHANNA from GERMANTOWN, MD
- Really Easy
- Less than 15 mins
Just opened the box, removed the 2 old burners and replaced with the 2 shiny new ones. Yeah success! I placed my order for this product and before I knew it, it was at my front door. Thank you!
Was this helpful?
Thank you for voting!
Replaced damaged oven rack
-
Vicki from Irvine, CA
- Really Easy
- Less than 15 mins
I ordered the oven rack on a Tuesday and received it the very next day - was wowed at the service.
Was this helpful?
Thank you for voting!
I needed an oven with three racks, mine came with two.
-
BETTY from CYPRESS, TX
- Easy
- Less than 15 mins
just slipped it in
Was this helpful?
Thank you for voting!
Burners were dirty and wore out
-
Birgit from Opelousas, LA
- Really Easy
- Less than 15 mins
Unplugged the old ones. Cleaned the stove top. Plugged in the new ones.
Was this helpful?
Thank you for voting!
no racks to oven
-
Johnette from Baltimore, MD
- Really Easy
- Less than 15 mins
Easily glide in.
Was this helpful?
Thank you for voting!
Missing oven rack
-
Damaris from Easton, PA
- Really Easy
- Less than 15 mins
I opened oven and pushed oven rack inside.
Was this helpful?
Thank you for voting!