RF491R3 Hotpoint Range - Parts

This six inch chrome drip bowl is intended for use with tilt lock style surface mount burner element units.

This 6 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.

This 8 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.

This closed hinged-style bake element has screw in terminals.

This eight inch chrome drip bowl is intended for use with with tilt lock style surface mount burner element units.

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

This surface element kit includes an 8 inch element, two wire, 2350 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come with an attached trim ring.

This light bulb lens covers the interior light bulb in an oven, range, or stove. No tools are necessary to replace this part. Simply slide off the wire bracket to remove the existing light bulb lens. Disconnect power to your appliance before this repair. It is recommended to check the light bulb while the lens cover is removed in case it ...Read moreneeds to be replaced. Be sure to remove all broken glass, if applicable, before installing new lens. This part is sourced directly from the genuine manufacturer, and is sold individually.

This genuine 6-inch surface heating element provides the heat needed for cooking on compatible electric ranges and cooktops. Designed with a tilt-lock hinge mounting system, it delivers consistent heat distribution for everyday cooking tasks such as boiling, simmering, and frying. Replacing a worn or failed surface element can help restor...Read moree proper burner performance when the burner no longer heats, heats unevenly, or cycles inconsistently. The element features a durable 3-wire design, operates at 240 volts, and delivers approximately 1,325 watts of heating power. Installation typically involves disconnecting power to the appliance, lifting the element from the receptacle, disconnecting the terminal connections, installing the replacement element, and restoring power to test operation. The element measures approximately 14 inches long, 7.5 inches wide, and 2 inches high and weighs approximately 1 pound.

This large broiler pan is found in the bottom of your oven and is used to catch drippings from broiling foods. This part includes the grate and bottom pan and is made of porcelain. The grate measures 15-1/2 inches wide by 13 inches deep and the pan is about 17 inches wide by 13 inches deep. No tools are required to replace this item, simp...Read morely pull out the lower drawer of your range, pull down the front of the drawer, slide the pan out and slide the new one into place. This is a genuine part sourced right from the manufacturer.

This part supports the broil element in the oven.