RF4287HARS Samsung Refrigerator - Parts

If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.

This evaporator fan motor is sourced from the original manufacturer for use in refrigerators. It circulates cold air throughout the refrigerator compartment to maintain consistent cooling. If the evaporator fan motor is faulty, you will notice inconsistent internal temperatures, excessive and unusual noise, and frost build up. To begin th...Read moree repair, disconnect the refrigerator from power and remove all shelves and food items in front of the rear panel. Remove the mounting screws on the rear panel and carefully detach it to expose the fan motor. Disconnect the wire connectors to the motor and pull it out of the refrigerator. You may reuse the old fan blades if they are in good condition. Insert the new motor in the refrigerator and reattach the mounting screws. Reconnect the wire connector and reassemble the refrigerator in reverse order.

This refrigerator water filter is supplied by Samsung to ensure it is an accurate fit for your fridge. It has a capacity of 300 gallons. The water filter helps to reduce water contamination by removing unwanted substances like chemicals and heavy metals which can make their way into your water supply. Each filter is tested and certified b...Read morey NSF international as a guarantee of safety. If the filter light indicator on your fridge is red, this indicates that it is time to change your filter. Each filter also comes with a monthly reminder sticker inside the packaging to help you remember to change your filter.

This is a power cord made for Samsung refrigerators. If your current power cord is damaged, broken, or no longer supplying power to your fridge, you can disconnect it from the wall outlet, strip it from your fridge, and replace it with this OEM cord. This power cord is sold individually and does not include any other parts or accessories.

This refrigerator door handle is a genuine OEM replacement part that is designed for Samsung freezers. The silver handle is made from high-strength aluminum alloy and coating. It is attached to the outer panel of the freezer where it allows for easy opening and closing of the freezer door. It has an ergonomic design that allows users to e...Read moreasily grip and pull the door to access the contents of the freezer. It is recommended to replace the handle if it is cracked, broken, unstable, or if its appearance has deteriorated.

This condenser fan blade (part number DA31-00010D) is for refrigerators. Condenser fan blade DA31-00010D moves air across the condenser coil to cool the hot refrigerant before it enters the evaporator. Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part.

This Samsung hex screw is a genuine OEM replacement fastener that is designed for the refrigerator door handle. It is a stainless steel screw that secures the handle to the refrigerator door. It is responsible for providing stability and support to the handle to ensure that the handle remains firmly attached and functional. Over time the ...Read moremounting screw may fail, typically due to wear and tear, accidental damage, or corrosion, and the handle may become loose or detach completely. A loose or detached handle can make it difficult to open or close the fridge door properly. Additionally, an unstable handle can cause damage to the door or handle mechanism, which can result in further costly repairs. Therefore, it is recommended to replace the mounting screw(s) promptly to ensure you can continue to use and enjoy your refrigerator. Be careful not to overtighten the screw during the repair as this can damage the handle and mounting surface. Each hex screw is sold individually.

This is a crisper drawer glass cover retainer designed for use within Samsung refrigerators. This small retainer clip is used to hold the glass pane in place, and if it is broken or missing, it should be replaced. Replacing this retainer is simple and only requires a flat-head screwdriver to lift out any existing retainer, and then you si...Read moremply push in the new retainer. This OEM retainer is sold individually, so if your refrigerator needs multiple, be sure to consider how many you need before ordering.