RF4287H Samsung Refrigerator - Parts

Keep the center door flap moving smoothly with this replacement spring for select French door refrigerators. The spring adds tension so the flap opens and closes as the doors move. Replace it if the flap stays open, blocks the door, or makes a rattling sound. Unplug the refrigerator before starting the repair. Check the exact appliance model number before ordering.

When the folding divider on a French-door refrigerator will not retract, the spring pin or sleeve may be worn or broken. This support piece helps hold the mullion spring in the left door so the flap moves as the doors open and close. Check for a missing spring, cracked hinge point, bent flap, or door alignment problem before choosing a re...Read moreplacement. Confirm fit with the full appliance model because small sleeves can differ. Record the spring position before removal and avoid forcing brittle plastic. Install the sleeve in the same direction shown in the service diagram, reconnect the spring carefully, and test the flap before loading the door with food.

This screw, known as a handle fixer, is used to keep the door handles on your refrigerator secure. This screw is a genuine OEM part that comes individually, and simply screws into place in your refrigerator, and then allows the refrigerator handle to slide onto it. Your refrigerator normally has two of these fixer screws, so be sure to check how many you require before ordering.

The water in your home can contain impurities that affect its clarity, taste, smell, and safety. Water can contain dirt, rust, chlorine, or water-hardening minerals. These deposits can cause health issues, damage to your refrigerator, and leave your water and ice cloudy and undrinkable. This OEM water filter uses a block of activated carb...Read moreon to filter these pollutants out, giving you healthy, clear, great-tasting water and ice. This filter fits many Samsung refrigerators, and is rated NSF 42 and 53, which certifies that this fridge filter removes pollutants including: chlorine, cysts, asbestos, benzene, sediment, and sand. A good way to judge whether the filter needs to be replaced is when the water flow to the dispenser starts slowing down and there has been no change to the water pressure to the product. There is no bypass needed. Just remove the filter and it will automatically bypass the water filter. It has an easy twist design making the replacement quick and painless with no need for tools or mess. It measures 2.13 inches by 2.13 inches by 8.86 inches and weights 0.56 lbs. Replace every six months.

This is a French door hinge that is compatible with various models of refrigerators and is used to control the mullion (long plastic strips) on the inside portion of the French doors. If you notice that your doors open and the mullion either moves freely or is stuck, this hinge needs to be replaced immediately to prevent issues with frost...Read more buildup, energy efficiency and temperature fluctuations. Replacing this hinge is quite simple, and you will only need a flathead and Philips-head screwdriver to do it. First, remove the screw covers from the securing screws for the mullion. Unscrew and remove the securing screws with your Philips-head screwdriver, and then pull the mullion up and out carefully to dislodge it from the fridge door. Near the middle of the mullion, disconnect the wire harness to remove the mullion completely. Remove the hinge cover with a flathead screwdriver to expose the hinge, and then carefully remove and replace the old hinge onto its attaching spring. Then you can simply reassemble the rest of the door assembly, along with the hinge cover and wire harness.

This freezer handle support is a 2.5-inch by 1-inch white plastic bracket designed to provide support and stability to the right side of the freezer door handle. It is an authentic manufacturer replacement part that distributes the force placed on the handle during use to prevent excessive stress on one area of the handle. The handle supp...Read moreort also secures the handle to the freezer door. You can find it on the inner right side of the freezer door handle. Over time the screw that secures the handle support may wear down or become stripped, or the plastic bracket may crack, causing the handle support to become unstable and unable to support the door handle. To access the faulty handle support bracket, first unthread the screws that secure it to the freezer door handle. Detach the handle and remove the screws that secure the handle support to the freezer door. Align the new handle support with the attachment points on the freezer door and secure it with the appropriate screws. Attach the handle to the new support and ensure it is securely fastened. Be careful not to not to overtighten the screws, to avoid stripping the mounting holes and damaging the handle support. Screws are sold separately. Please note that this support is for the right side of the handle. The left-side support is sold separately.

This a genuine OEM temperature sensor, designed for use with refrigerators, and is an individual part. This temperature sensor is responsible for detecting and adjusting the temperature in your refrigerator. If your refrigerator is having issues with being either too cold, or too warm, it is likely that this sensor needs to be replaced. T...Read moreo replace it, ensure that your refrigerator is turned off before you locate it with your user manual and replace it.

Sold individually.

This evaporator fan motor is in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. When the evaporator fan motor fails, it often generates a lot of noise in the freezer area. If you notice that your refrigerator or freezer is noisy, or is not ...Read morecooling like it should, you may need to replace the evaporator fan motor. The base of this part is approximately 3 inches in length and 2 inches in width. The shaft of this part is an additional 2 inches in length.

This is the end cap for the freezer door of various Samsung refrigerators. This end cap is made of plastic and features a brushed-metal finish, and simply snaps on or off the end of the freezer door handle. If your freezer door handle is missing its end caps, or if they are damaged, they should be replaced to give your door handle a more ...Read morefinished appearance. Most handles require two end caps, so be sure to consider how many end caps you require before ordering.

This ice maker assembly in your bottom-freezer refrigerator automatically produces and dispense ice. It consists of a mold for 9 ice cubes, a control device, and a 12-pin wiring connection and housing. Its dimensions are approximately 4-1/2 inches by 12-3/4 inches by 4-1/4 inches, and it can produce about 84 ice cubes within 24 hours. Thi...Read mores genuine OEM assembly is sold separately from the water line and the water inlet valve.