This refrigerator door handle mounting stud anchors the handle to the door panel, providing a firm attachment point for everyday use. It screws into the door and connects with the handle to help keep it secure when pulled. A broken stud, worn mounting head, or damaged threads may cause the handle to wobble, pull away, or come loose. Repla...Read morecing a damaged stud helps restore a steady grip and keeps the handle firmly attached, making the refrigerator door easier to open. This is an OEM part sourced directly from the manufacturer.
The water in your home can contain impurities that affect its clarity, taste, smell, and safety. Water can contain dirt, rust, chlorine, or water-hardening minerals. These deposits can cause health issues, damage to your refrigerator, and leave your water and ice cloudy and undrinkable. This OEM water filter uses a block of activated carb...Read moreon to filter these pollutants out, giving you healthy, clear, great-tasting water and ice. This filter fits many Samsung refrigerators, and is rated NSF 42 and 53, which certifies that this fridge filter removes pollutants including: chlorine, cysts, asbestos, benzene, sediment, and sand. A good way to judge whether the filter needs to be replaced is when the water flow to the dispenser starts slowing down and there has been no change to the water pressure to the product. There is no bypass needed. Just remove the filter and it will automatically bypass the water filter. It has an easy twist design making the replacement quick and painless with no need for tools or mess. It measures 2.13 inches by 2.13 inches by 8.86 inches and weights 0.56 lbs. Replace every six months.
For a refrigerator that needs an ice maker assembly, this OEM part produces up to 7.5 pounds of ice per day. It is rated for 120 V and measures 11.8 x 5.5 x 4.7 inches. Check those details against your existing assembly.
This freezer handle support is a 2.5-inch by 1-inch white plastic bracket designed to provide support and stability to the right side of the freezer door handle. It is an authentic manufacturer replacement part that distributes the force placed on the handle during use to prevent excessive stress on one area of the handle. The handle supp...Read moreort also secures the handle to the freezer door. You can find it on the inner right side of the freezer door handle. Over time the screw that secures the handle support may wear down or become stripped, or the plastic bracket may crack, causing the handle support to become unstable and unable to support the door handle. To access the faulty handle support bracket, first unthread the screws that secure it to the freezer door handle. Detach the handle and remove the screws that secure the handle support to the freezer door. Align the new handle support with the attachment points on the freezer door and secure it with the appropriate screws. Attach the handle to the new support and ensure it is securely fastened. Be careful not to not to overtighten the screws, to avoid stripping the mounting holes and damaging the handle support. Screws are sold separately. Please note that this support is for the right side of the handle. The left-side support is sold separately.
Collect and dispense ice with this refrigerator ice bucket assembly. Its storage container holds cubes from the ice maker, while the internal auger moves them toward the dispenser and crushing blades. Cracked housing, worn drive connections, or damaged blades may cause jams, grinding noises, or failure to dispense ice. Replacing a damaged...Read more assembly helps restore secure storage and smooth ice delivery. Disconnect power before handling moving parts, empty the bucket before removal, and keep fingers clear of sharp blades when seating the replacement. This is an OEM part sourced directly from the manufacturer.
This refrigerator mullion flapper hinge supports the folding strip that seals the gap between the two doors. It allows the strip to pivot as the door opens and closes, helping it move into the proper sealing position. A cracked, warped, or broken hinge may leave the strip loose, stuck, or unable to fold correctly. This can make the door h...Read morearder to close and allow cold air to escape. Replacing a damaged hinge helps restore smooth movement and a secure seal between the doors. This is an OEM part sourced directly from the manufacturer.
This refrigerator temperature sensor tracks temperature changes and sends readings to the main control board. These readings help the refrigerator manage cooling and defrost cycles to keep food at a steady temperature. A faulty sensor may send incorrect readings, leading to uneven cooling, frost buildup, or a compartment that feels too wa...Read morerm or too cold. The attached wire and plug connect the sensor to the electrical system. Replacing a failed sensor helps restore accurate temperature readings. Unplug the refrigerator before starting the repair. This is an OEM part sourced directly from the manufacturer.
This evaporator fan motor is in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. When the evaporator fan motor fails, it often generates a lot of noise in the freezer area. If you notice that your refrigerator or freezer is noisy, or is not ...Read morecooling like it should, you may need to replace the evaporator fan motor. The base of this part is approximately 3 inches in length and 2 inches in width. The shaft of this part is an additional 2 inches in length.
This is an evaporator fan motor for a wide range of Samsung refrigerators. Evaporator fans pull warm air through evaporator coils to cool and maintain the internal temperature of the refrigerator. If the evaporator fan motor in your refrigerator is not working properly, your fridge will not cool properly and may even prevent the ice maker...Read more and water dispenser from working, and it will ultimately need to be replaced. This OEM evaporator fan motor measures approximately 4 inches long by 4 inches wide and will need a screwdriver and needle nose pliers to be removed and installed.
This is the end cap for the freezer door of various Samsung refrigerators. This end cap is made of plastic and features a brushed-metal finish, and simply snaps on or off the end of the freezer door handle. If your freezer door handle is missing its end caps, or if they are damaged, they should be replaced to give your door handle a more ...Read morefinished appearance. Most handles require two end caps, so be sure to consider how many end caps you require before ordering.
This refrigerator auto-close lever assembly helps pull the door closed as it reaches the end of its closing motion. It works with the door mechanism to support smooth movement and help the door stay firmly shut. A cracked, broken, or worn lever may leave the door slightly open or make it harder to close properly. Replacing a damaged assem...Read morebly helps restore the closing action, reducing cold air loss and helping the refrigerator maintain a steady temperature during everyday use. This is an OEM part sourced directly from the manufacturer.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Evaporator frozen (refrigrator section) and allowing top section to lose cooling
109 of 183 peoplefound this instruction helpful.
Richard from GULFPORT, MS
Easy
30 - 60 mins
Screw drivers
This is the Samsung French door refrigerator style that so many people have complained about freezing up and not cooling the top section. I first changed out the defrost thermostat and this did not correct the problem. I done a quick resistance check on the temp sensor that's mounted on the evaporator itself. The resistance would change w
... Read morehen holding an ice cube on the sensor so I just assumed it was ok. PLEASE TAKE NOTE: When performing a resistance check on this sensor, make sure your readings match the Samsung temp/resistance chart in their literature. My sensor was way off calibration and was causing the freeze up. Its working as designed now and DW is happy again. Learn from my mistake.
Read less
Was this helpful?
Thank you for voting!
Ice maker freezing over, causing ice to get stuck
28 of 49 peoplefound this instruction helpful.
larry from RICHLAND, WA
Really Easy
30 - 60 mins
Pliers, Screw drivers
Replaced parts, as ordered - very simple. Watched the video before hand. Found that existing assembly did not have the "Y" clip installed. Been making ice for three weeks with no freezing up (yet) - time will tell.
Main refrigerator was not cooling down adequately.
14 of 15 peoplefound this instruction helpful.
James from VISALIA, CA
Easy
30 - 60 mins
Screw drivers
I looked up a YouTube video and it gave pretty well laid out instructions on how to replace the Twin fan assembly in the main compartment. There was also a suspicion that the sensor wasn't working properly and the fan had ice on it. Once I removed the main housing at the back of the inside of refrigerator it was relatively easy
... Read moreto replace the fan motor, and sensor. You have to follow the disassemble procedure closely in getting the main housing out. You have to remove the clear plate covering the water filter. Then remove the bottom shelf, which then gives you access to the large white back panel. After that its easy to replace the motor and sensor.