All Installation Instructions for Samsung Refrigerator RF267ABBP

A broken siphon break elbow

Partselect made the repair process incredibly easy by linking a how-to video that explained exactly what to do. Without the video, I was trying to take the whole washer apart, but the video noted a convenient opening that provided easy access.
This is my second experience with Partselect, and I am definitely a fan. How you can maintain a stockpile of parts for so many appliances (as well as providing installation guidance for at least some items) is remarkable. Thanks.

Parts Used:

Case Cap

Nelson from HENRICO, VA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

brackets broke that hold the tiltable tray for the freezer

Extremely simple, remove the old tray brackets and snap the news one in place. Put just enough pressure till you here them click in place.

Parts Used:

Support - Guard Freezer

Jerry from Manvel, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Brokjen spring

Lifted out the broken part and replaced with new spring.

Parts Used:

Door Mullion Spring

Sharol from Culdesac, ID
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

french spring broke

after receiving spring installed spring in seconds. Thanks partselect.com Ryan Cappell

Parts Used:

Door Mullion Spring

RYAN from RIVERBANK, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

French spring broke.

pushed new spring in.

Parts Used:

Door Mullion Spring

Andrew from Bensalem, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

6 of 26 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Not making ice. Making ice slowly. Clicking sound when making ice.

(1) Set ice production to OFF from the front panel of the refridgerator. (2) Inside the fridge, remove the screw holding the panel covering the cable for the ice naker assembly. (3) Remove the panel. (4) Disconnect the power cable of ice maker. (5) Holding the assembly with one hand, release the locking clip of assembly housing, and slide assembly forward until it is free. (6) Remove the ice maker assembly. (7) Install the new assembly by reversing the previous steps. (8) Reset the ice maker by pressing the reset button and holding it for at least 8 seconds. The first time the ice maker is primed with water, there are 2 chimes. (1 High , 1 Low).

Parts Used: