RF24FSEDBSR (EE) Samsung Refrigerator - Parts

This screw, known as a handle fixer, is used to keep the door handles on your refrigerator secure. This screw is a genuine OEM part that comes individually, and simply screws into place in your refrigerator, and then allows the refrigerator handle to slide onto it. Your refrigerator normally has two of these fixer screws, so be sure to check how many you require before ordering.

This a genuine OEM temperature sensor, designed for use with refrigerators, and is an individual part. This temperature sensor is responsible for detecting and adjusting the temperature in your refrigerator. If your refrigerator is having issues with being either too cold, or too warm, it is likely that this sensor needs to be replaced. T...Read moreo replace it, ensure that your refrigerator is turned off before you locate it with your user manual and replace it.

This is an evaporator fan motor for a wide range of Samsung refrigerators. Evaporator fans pull warm air through evaporator coils to cool and maintain the internal temperature of the refrigerator. If the evaporator fan motor in your refrigerator is not working properly, your fridge will not cool properly and may even prevent the ice maker...Read more and water dispenser from working, and it will ultimately need to be replaced. This OEM evaporator fan motor measures approximately 4 inches long by 4 inches wide and will need a screwdriver and needle nose pliers to be removed and installed.

If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.

This evaporator fan motor is sourced from the original manufacturer for use in refrigerators. It circulates cold air throughout the refrigerator compartment to maintain consistent cooling. If the evaporator fan motor is faulty, you will notice inconsistent internal temperatures, excessive and unusual noise, and frost build up. To begin th...Read moree repair, disconnect the refrigerator from power and remove all shelves and food items in front of the rear panel. Remove the mounting screws on the rear panel and carefully detach it to expose the fan motor. Disconnect the wire connectors to the motor and pull it out of the refrigerator. You may reuse the old fan blades if they are in good condition. Insert the new motor in the refrigerator and reattach the mounting screws. Reconnect the wire connector and reassemble the refrigerator in reverse order.

This ice maker assembly is for refrigerators. Ice maker assembly contains the complete ice maker and housing. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included. Safely store any food that could deteriorate while the power is off and unplug the refrigerator when installing this part. Wear work gloves to protect your hands.

This is a crisper drawer glass cover retainer designed for use within Samsung refrigerators. This small retainer clip is used to hold the glass pane in place, and if it is broken or missing, it should be replaced. Replacing this retainer is simple and only requires a flat-head screwdriver to lift out any existing retainer, and then you si...Read moremply push in the new retainer. This OEM retainer is sold individually, so if your refrigerator needs multiple, be sure to consider how many you need before ordering.

COVER-HEATER FRENCH;AW-P

SENSOR TEMP;PX-41C,-40~1

This ice tray or ice container assembly is a genuine replacement part made for Samsung refrigerators. It is located in the freezer compartment where it is mounted either on the ceiling or on the side of the compartment. If you have a side-by-side fridge, the assembly is typically found on the freezer door. The ice tray assembly is respons...Read moreible for holding and dispensing ice cubes as needed. It includes the ice tray, mold, ejector blades, and storage bin. If one of the components of the assembly is damaged or faulty, the ice maker will be unable to form or release ice cubes properly.

This door switch (part number DA34-00066C) is for refrigerators. Door switch DA34-00066C turns the light off when you close the door. Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.