RF197ACBP Samsung Refrigerator - Overview
Models starting with RF197ACBP
Click on the best match to narrow your results.
- RF197ACBP (XAA-0000) Samsung Refrigerator (REFRIGERATOR)
- RF197ACBP ( XAA-00 ) Samsung Refrigerator (Samsung Rf197acbp/Xaa-00 Refrigerator)
- RF197ACBP Samsung Refrigerator (Samsung Refrigerator Rf197acbp)
- RF197ACBP/XAA Samsung Refrigerator
- RF197ACBPXAA Samsung Refrigerator (Samsung Refrigerator Model RF197ACBPXAA Parts)
- RF197ACBPXAC Samsung Refrigerator (Samsung Refrigerator Model RF197ACBPXAC Parts)
Keep searches simple, eg. "belt" or "pump".
Door Mullion Spring
PartSelect #: PS4163672
Manufacturer #: DA81-01345B
The French door divider spring fits most Samsung French door style refrigerators. The spring applies tension between components in the refrigerator, which engages and retracts the door flap. This will...
$9.44
In Stock
Spring PIN - French
PartSelect #: PS4163673
Manufacturer #: DA81-01346A
This pin acts as a sleeve for the French door spring in a refrigerator. This is a genuine OEM part that is sold individually and works with the spring within the door mullion to seal the door shut. If...
$4.66
In Stock
Handle Mounting Screw
PartSelect #: PS4144145
Manufacturer #: DA61-03734A
This screw, known as a handle fixer, is used to keep the door handles on your refrigerator secure. This screw is a genuine OEM part that comes individually, and simply screws into place in your refrig...
$10.64
In Stock
Hinge - French Door
PartSelect #: PS4143931
Manufacturer #: DA61-03230B
This is a French door hinge that is compatible with various models of refrigerators and is used to control the mullion (long plastic strips) on the inside portion of the French doors. If you notice th...
$8.25
In Stock
Ice Cube Tray
PartSelect #: PS4149221
Manufacturer #: DA63-02284B
The ice maker cube tray holds the water that comes from the ice maker during the process of it becoming ice. This part is white in color and made of plastic. All you will need for this repair is a fla...
$38.16
In Stock
Samsung Defrost Sensor
PartSelect #: PS4138681
Manufacturer #: DA32-10105R
The Samsung Defrost Sensor (DA32-10105R) is a genuine part designed specifically for Samsung refrigerators. This sensor, sometimes referred to as a defrost thermostat or defrost temperature sensor, is...
$35.77
In Stock
Evaporator Fan Motor
PartSelect #: PS4138377
Manufacturer #: DA31-00146H
This evaporator fan motor is sourced from the original manufacturer for use in refrigerators. It circulates cold air throughout the refrigerator compartment to maintain consistent cooling. If the evap...
$138.68
In Stock
Bi-Metal Defrost Thermostat
PartSelect #: PS4140510
Manufacturer #: DA47-00243K
If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.
$54.92
In Stock
Ice Maker Assembly
PartSelect #: PS5575313
Manufacturer #: DA97-07603B
This is a 40W/120V ice maker assembly for your refrigerator. Ice maker assemblies are designed to continuously make ice cubes by supplying water through its valve, freezing it, and then ejecting the c...
$188.94
In Stock
Cover - Sensor;AD,PP,T1.0,
PartSelect #: PS4149137
Manufacturer #: DA63-02183A
This sensor cover, also known as the ice maker thermostat cover, is a genuine OEM replacement part for Samsung refrigerators. It is made of durable white plastic and has measurements of approximately ...
$8.25
On Order
Common Symptoms of models starting with RF197ACBP
[Viewing 3 of 3]Door won’t open or close
Fixed by
these parts
these parts
Show All
Fridge too warm
Fixed by
these parts
these parts
Show All
Ice maker not making ice
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Left side French Door flap on Samsung refrigerator didn't retract when closing.
OMG seriously! I stopped into my go-to appliance repair shop to ask about what might be needed to repair the problem with my refrigerator door. They said you will need to replace the Mullion Flap piece. Cost would be $250-300 with part, labor and service. I went on line to see if I could handle the repair process myself. I found a How to
... Read more
- U Tube video and turns out I only needed to replace a little spring and pin not the whole Mullion Flap. Went to Parts select, ordered the spring and pin and did the repair myself in about 5 minutes. Shipping was $7 so I ended up paying $13 total.
Read less
Parts Used:
-
HOLLIE from FORT WAYNE, IN
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
42 of 52 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Installation Video Incorrect
The installation video notes that the door mullion spring has a bent end, and that the bent end of the spring is to be inserted into the LOWER hinge. However, on my refrigerator door, the bent end of the door mullion spring must be inserted into the UPPER hinge in order for the door to function properly. (Also noted that in your video t
... Read more
he installer manually closed the door mullion rather than just closing the refrigerator door, another indication that the installation of the spring was incorrect.) After watching the video several times to confirm I was installing the door mullion spring according to the video instructions, I tried inserting the bent end of the door mullion spring into the upper hinge, which proved to be the correct installation of the door mull spring. What should have been a 5 minute repair turned into an ½ hour repair.
Read less
Parts Used:
-
Cheryl from PALATINE, IL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers
23 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
spring in door mullion had broken
There is a pretty good video about this on youtube, but complications arose nonetheless. The replacement spring supplied by Partselect is a bit different from the original in two ways. First, it is made of heavier-gauge wire; this is a good thing for durability, but it makes installation tougher. Second, the ends of the spring, which a
... Read more
re bent at right angles to the spring axis in order to fit into the plastic sleeves that hold the spring ends, are far too long. Once I figured this out, i snipped the ends down by a quarter inch or so, and they fit into the sleeves just fine after a certain amount of persuasion from needle-nose pliers. All things considered, it was a bit harder than it should have been, but the door works now, so all is well.
Read less
Parts Used:
-
Gary from TUPPER LAKE, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers
11 of 22 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!