My Orders
RF1052LS LG Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven would not reach set operating temperature
3 of 4 people
found this instruction helpful.
-
Charles from Camden, AR
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Removed the back of the Range. Removed one wire at a time from the old PCB and placed it in position on the New PCB. Then secured the New PCB in the holder.
Was this helpful?
Thank you for voting!
No power to unit after self clean was ran.
1 person
found this instruction helpful.
-
ROBERT from CHIPPEWA FLS, WI
- Easy
- 30 - 60 mins
-
Screw drivers
Unscrewed the back panel and Sub assembly then unplugged the board and replugged and put back screws. The ribbon wires were kinda hard to put back in make sure they are in all the way. Check the therm fuse first ( $3.00 fix ) mine was good so next was to try the board.
Was this helpful?
Thank you for voting!
Thermostat needed to be replaced
8 of 27 people
found this instruction helpful.
-
Denise from NORTH BEACH, MD
- Really Easy
- Less than 15 mins
-
Screw drivers
We had made this determination with the help of a repairman on the phone. I ordered the part and waited for it. It was stuck in West Virginia. After several days after it was expected a repairman fixed my range to the tune of $168. It should have cost $30 (the cost of the part and shipping).
Unfortunately I probably won't order ... Read more from PartSelect again.
Unfortunately I probably won't order ... Read more from PartSelect again.
Read less
Was this helpful?
Thank you for voting!
Broken front leveler
8 of 36 people
found this instruction helpful.
-
K R from BOISE, ID
- Very Easy
- Less than 15 mins
-
Pliers, Screw drivers
This is a very simple repair of remove and replace. You do have to lay down the range to make it easy.
Was this helpful?
Thank you for voting!