RC777*01 Hotpoint Range - Parts

The broil element is located at the top of the oven and gives off heat in order to bake evenly. If you notice that the element is not heating up or is not cooking evenly it could be because it is broken or burnt out. The depth of the screw-on terminals is 2-3/4 inches and they are 1-1/4 inches apart. Does not include mounting bracket. All...Read more you need for this simple repair is small screwdriver. To complete this repair, you will need to first turn the oven off (or shut off the house circuit breaker), remove the two screws that are holding the old element in place, remove the two wires from the old part, and then connect them to the new part and screw back into place.

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

This part fits most ranges where a ceramic terminal block is used.

This 6-inch stove surface element features a durable coil design that delivers steady, reliable heat for everyday cooking. It’s an ideal replacement when a burner no longer heats properly or warms unevenly. Designed for standard electric ranges without Sensi-Temp technology, this element helps restore consistent cooking performance with a quick, easy installation.

This bake element has screw-on terminals.

This sensor offers 16 ohms of resistance at room temperature, though the resistance increases as the temperature increases.

The length of this thermostat's capillary is 62 inches.

Hardware included.