RB636201 Hotpoint Range - Instructions

Just an easy replacement. Problem was, I couldn't find the parts. The service and turn-around was fabulous!

pulled out the old one pushed in the new one

Simply unplugged the burned out one and plugged in the new one. It worked like a charm.

Easily, removed old brackets and installed new. Screw driver required. Very quick repair. Excellent quick turn around on the order. Received within 3 days of order.

Removed 2 sheet metal screws. Threw away old part. Replaced with new part secured with the same old sheet metal screws. Works perfectly. Actually it took longer to type this response. I was very pleased with Part Select. If I need another part you'll be hearing from me.

I bought the replacement element for my 98-year-old aunt, and she installed it.

Just plugged it in! Very easy.

Threw away the old ones after lifting burner rings. Put new parts in place.

I tried first to replace them, with a set I bought at a local hardware store. But they were too small. So I went on the internet, and found Part Select, and thanks to a very helpful guy, who made the extra effort to find the exact drip bowls, I now have a nice, shiny stove-top again. Installing them took two minutes... tilt the burners u ... Read more p, and slide them in. No problem.

lift up to 45 degree angle and pull towards you. This one went bad and the contacts welded themselves together. Took some shifting and tugging to free it. Normally, they slide in and out effortlessly, like any plug.

I had an appliance guy replace a burner(Calrod unit)on my 47 year-old GE range, but he didn't tell me that the original trim ring wouldn't fit. I decided to look up on PartSelect to see if I could get one to fit the new burner, and I did! Fits perfectly......no tools needed.

could not find the proper pans and rings in any diy stores, as stove is so old. went on this site and there they were!!!

Worked, don't have to replace an old GE combination range "Microwave Cooking Center" when the surface units rusted out.