This light bulb is a 120 volt, 25 watt incandescent appliance light bulb with a small base screw-in that fits in a variety of appliances such as microwaves, refrigerators, freezers, cooktops, or stoves. Its purpose is to light up the appliance when the door is open. This is a genuine OEM part. You may need to replace the light bulb if the...Read more existing bulb is burnt out or broken. This light bulb is sold individually and is a common wear part, it is recommended to order a spare.
The Samsung Defrost Sensor (DA32-10105R) is a genuine part designed specifically for Samsung refrigerators. This sensor, sometimes referred to as a defrost thermostat or defrost temperature sensor, is an integral part of your refrigerator's defrost system.
This temperature sensor (part number DA32-10105T) is for refrigerators. Temperature sensor DA32-10105T senses the temperature inside the refrigerator and sends information to the electronic control. Unplug the refrigerator and safely store any food that could deteriorate while the power is off before installing this part. Wear work gloves to protect your hands.
This evaporator fan blade is for refrigerators. Evaporator fan blade circulates air through the evaporator fins and interior compartment of the refrigerator to improve the cooling efficiency.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
burnt out bulb
27 of 63 peoplefound this instruction helpful.
THOMAS from STOW, OH
Really Easy
Less than 15 mins
took cover off, installed bulb. lost the owners manual, part select's schematics were very helpful thanks
Was this helpful?
Thank you for voting!
light blew out
7 of 10 peoplefound this instruction helpful.
KELVIN from SOUTHFIELD, MI
Very Easy
Less than 15 mins
change light bulbs
Was this helpful?
Thank you for voting!
Ice Build up behind refrigerator internal panel
4 of 6 peoplefound this instruction helpful.
David from WILMINGTON, DE
Really Easy
More than 2 hours
Pliers, Screw drivers
I performed the repair to my own refrigerator, after watching multiple YouTube videos. I installed a secondary heater for the defrost coils and replaced the defrost sensor. The defrost sensor was actually bad. Today, 1/27/2024 I rechecked the fix from last week. All seems to be good so far.
If I get any build up of any ice on t
... Read morehe bottom tray of the recessed panel where the drain port is located. I suspect I will also need a new Defrost Heater as well. For now the refrigerator is operating as expected. There is a small amount of ice build up as of today.
Also, I had recently replaced the drain tubes, added a longer heater element part to fit the drain hole, and cleaned the fins in the back of the refrigerator. Thank you.