The Samsung Defrost Sensor (DA32-10105R) is a genuine part designed specifically for Samsung refrigerators. This sensor, sometimes referred to as a defrost thermostat or defrost temperature sensor, is an integral part of your refrigerator's defrost system.
This temperature sensor (part number DA32-10105T) is for refrigerators. Temperature sensor DA32-10105T senses the temperature inside the refrigerator and sends information to the electronic control. Unplug the refrigerator and safely store any food that could deteriorate while the power is off before installing this part. Wear work gloves to protect your hands.
This evaporator fan blade is for refrigerators. Evaporator fan blade circulates air through the evaporator fins and interior compartment of the refrigerator to improve the cooling efficiency.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jaime - For model number RB2155SH
December 20, 2024
It works, but in the control board I can go down with the temperature but can't go back up, and when it gets to the temperature it shut off but I have to disconnect the electric cord and connect it again to start it up, I ordered a control board, but I got a wrong one,, the one on the refrigerator has a mode W2-PJT(USA) VER5.0. ,N04Y 123456789ABC
Hello Jaime, thank you for your question. The Control Board we find is PS4139480. We hope this helps.
Temp control starts flashing for both fridge and freezer and it stops cooling can unplug and plug back in and it may work properly for a couple hrs or a few days
Hello John, thank you for your question. It could be clogged coils. Check to make sure nothing is stuck in the condenser fan and that it spins freely. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Prev
1
Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice Build up behind refrigerator internal panel
5 of 7 peoplefound this instruction helpful.
David from WILMINGTON, DE
Really Easy
More than 2 hours
Pliers, Screw drivers
I performed the repair to my own refrigerator, after watching multiple YouTube videos. I installed a secondary heater for the defrost coils and replaced the defrost sensor. The defrost sensor was actually bad. Today, 1/27/2024 I rechecked the fix from last week. All seems to be good so far.
If I get any build up of any ice on t
... Read morehe bottom tray of the recessed panel where the drain port is located. I suspect I will also need a new Defrost Heater as well. For now the refrigerator is operating as expected. There is a small amount of ice build up as of today.
Also, I had recently replaced the drain tubes, added a longer heater element part to fit the drain hole, and cleaned the fins in the back of the refrigerator. Thank you.
Read less
Was this helpful?
Thank you for voting!
Fridge side no longer cooled, freezer still workekd fine.
3 of 5 peoplefound this instruction helpful.
Roger from Belle Fourche, SD
Easy
1- 2 hours
Screw drivers
A couple of blogs said the freezer defrost sensor should be replaced, so I ordered one. Did not fix it. I did, however find a service manual online and one of the blog sites and it showed me how to remove the inside duct work. I discovered the fan the recirculates the air across the evaporator coil was not working. Ordered a new fan mo
... Read moretor and installed it, fridge works perfectly now.
Read less
Was this helpful?
Thank you for voting!
Refrigerator Temperature Blinking
0 of 3 peoplefound this instruction helpful.
Christopher from Queen Creek, AZ
Easy
1- 2 hours
Screw drivers
I removed all of the internal shelves from the refrigerator side. I then removed the cooling panels from the bottom area. this exposed the fan assembly and cooler. I found ice all over the unit. I had to unplug the refrigerator and used a hair dryer to melt the ice away. I then found the sensor and replace it. After putting the refrigerat
... Read moreor back together, I plugged it in and let it cool overnight. I also put a thermometer to validate that cooling was stable. it has been a week with the new sensor and the refrigerator has not frozen over and has been very stable.