RAD-183BAWYAHCI LG Air Conditioner - Parts

This part is a thermistor assembly and it works in conjunction with your room air conditioner. The thermistor is a sensor that attaches to the control board of your air conditioner. Once attached it will help regulate and monitor the temperature within the room. This model measures to be slightly under 20 inches in length, and it is black...Read more in color. The most common reason for needing to replace this part is if your appliance is no longer cooling properly. To replace this assembly, you will need a screwdriver set.

This fan assembly or also known as a condenser fan blade is used in air conditioners. The blade fits onto the motor shaft and distributes air over the condenser to cool the refrigerant before it goes into the evaporator. This part blows air parallel to the motor shaft which the blade rotates on to successfully circulate the air. It is mad...Read moree from white plastic. *Please note: This part is sold individually. This part comes with a slinger ring. Refer to the manual provided by the manufacturer for installation instructions and further guidance.

This control board, also known as a display board, is used for air conditioners. The control board regulates and carries the power to the various air conditioner components. If your control is defective or broken, it should be replaced or it will affect how your air conditioner functions. Check for other commonly defective parts that occu...Read morer before replacing the control board. Refer to the manual provided by the manufacturer for installation instructions and accurate guidance. Remember to unplug your appliance from the power source for safety before beginning this repair.

The installation kit contains the hardware you need to install the room air conditioner in a window. The kit also includes the accordion filler panels, installation brackets and seal.

If your air conditioner is not blowing cold air, the problem may be in the capacitor. If the capacitor fails, the compressor will not start and the fan will only blow warm air. The compressor and capacitor are located inside the cabinet and to gain access you will need to remove the cover. If the capacitor does not show any visible signs ...Read moreof damage you may require a qualified technician to test it. Make sure that the replacement capacitor has the same specifications as the original. NOTE: Because capacitors carry a charge even when the unit is disconnected from the power, use extra caution when performing this repair.