RA524WA General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
burner terminal block was worn out
1 person
found this instruction helpful.
-
Mario from RENO, NV
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers
I unhooked the main power cord, unhooked the worn out block terminal cut the tape that was holding all the wires together. Removed the back panel and followed the wires unhooked the 2 wires and installed the new block terminal. Tied all the wires back, attached the back panel and plugged the power cord back into the outlet. i tested the b
... Read more
urner to see if it was working. The burner is working great, instructions were easy to follow and my wife is happy. Thank you
Read less
Was this helpful?
Thank you for voting!
ONE OF SURFACE BURNER NOT WORKING
1 person
found this instruction helpful.
-
QUANG from LANCASTER, PA
- Really Easy
- 30 - 60 mins
-
Nutdriver
I UNPLUGGED THE WIRE, ASSEMBLE THE BURNER ELEMENT KITS
LIFTED UP THE SURFACE BURNER PANEL,
OPENED THE BACK RANGE COVER,
UNSCREW THE NUT HOLDING THE BURNER CONNECTOR, DISCONNECT THE REPLACEMENT WIRES ON THE BACK PANEL
TRACE THE NEW WIRES CLIPS TO THE BACK PANEL & TIGHTEN THEM WITH EXISTING NUTS
SCREW THE OTHER EN ... Read more DS BACK WITH NUT HOLDING THE BURNER CONNECTOR
LIFTED UP THE SURFACE BURNER PANEL,
OPENED THE BACK RANGE COVER,
UNSCREW THE NUT HOLDING THE BURNER CONNECTOR, DISCONNECT THE REPLACEMENT WIRES ON THE BACK PANEL
TRACE THE NEW WIRES CLIPS TO THE BACK PANEL & TIGHTEN THEM WITH EXISTING NUTS
SCREW THE OTHER EN ... Read more DS BACK WITH NUT HOLDING THE BURNER CONNECTOR
Read less
Was this helpful?
Thank you for voting!
bake element oven melted and replaced
1 person
found this instruction helpful.
-
Jeffrey from ELKTON, MD
- Very Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
Bake element melted when food fell on the hot element during cooking. Element melted. Nutdriver removed two screws on back panel of oven. Unscrewed two wires on old element. Screwed two wires to new element. Nutdriver two screws to back panel of oven. Done. Test new element.
Was this helpful?
Thank you for voting!
the drip bowls were worn out
1 person
found this instruction helpful.
-
linda from STANTON, MI
- Very Easy
- Less than 15 mins
simply replaced them.
Other Parts Used:
Was this helpful?
Thank you for voting!
Drip bowl from a big box store was too big even though both say 8”.
1 person
found this instruction helpful.
-
Kathleen from INCLINE VLG, NV
- Very Easy
- Less than 15 mins
Ordered the part and set it in.
Was this helpful?
Thank you for voting!
burner was not heating
1 person
found this instruction helpful.
-
lucille from HAPPY CAMP, CA
- Very Easy
- 15 - 30 mins
-
Screw drivers
unplug it and plug the new one in
Was this helpful?
Thank you for voting!
on off switch smoked and smelled hot
1 person
found this instruction helpful.
-
john from MILROY, PA
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
standard procedure, very simple
Was this helpful?
Thank you for voting!
Old unit was bent and didn't work properly
1 of 2 people
found this instruction helpful.
-
Christine from Danbury, NC
- Really Easy
- Less than 15 mins
I unplugged the old unit and plugged in the new one! It works.
Was this helpful?
Thank you for voting!
coils with tips damaged
1 of 2 people
found this instruction helpful.
-
Jose from The Woodlands, TX
- Really Easy
- Less than 15 mins
it was very easy, a few seconds and new range for a cuople of years more!
Other Parts Used:
Was this helpful?
Thank you for voting!
Burnt Terminal Block
1 of 2 people
found this instruction helpful.
-
Bayani P. from DALY CITY, CA
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Unplug the range before opening the back panel and removed the wiring connection and replaced with the new one
Was this helpful?
Thank you for voting!
burner broke apart under a pot
0 of 1 people
found this instruction helpful.
-
Mary from south bristol, ME
- Really Easy
- Less than 15 mins
Pulled out the burner. Just pulled and out it came. Looked you up online. Crawled around on the floor trying to find the model number. (This was the hardest part of the whole process.) Ordered the part; it came the very next day despite the fact that I didn't order special shipping. Unpacked the part, plugged it in. And it worked!!!!
... Read more />
FABULOUS service. Thank you so much.
... Read more />
FABULOUS service. Thank you so much.
Read less
Was this helpful?
Thank you for voting!
metal "Y",shape metal long arm attached to burner came loose.holding the coil to burner
1 of 4 people
found this instruction helpful.
-
Audret K, from San Diego, CA
- Really Easy
- Less than 15 mins
just plugged in the two prings into burner into outlet. Very simple and quick.
Was this helpful?
Thank you for voting!
Live in an apartment and they had generic drip pans on the stove causing pots to tilt when cooking.
0 of 1 people
found this instruction helpful.
-
Jennifer from Cleveland, OH
- Really Easy
- Less than 15 mins
Replaced drip pans that the apartment Superintendent had in place with the correct drip pans and now cooking is beautiful again! No more uneven cooking on the stove top.
Other Parts Used:
Was this helpful?
Thank you for voting!
Finish coming off of bowls
0 of 2 people
found this instruction helpful.
-
Robert from Ledyard, CT
- Really Easy
- Less than 15 mins
Removed burner from each one. removed drip bowl. Inserted new bowl. Replaced burner. Excellent help from order people so I got the correct bowl was irreplacable.
Other Parts Used:
Was this helpful?
Thank you for voting!
The Heating Element's Contacts Were Burnout
0 of 5 people
found this instruction helpful.
-
Manuel from Quakertown, PA
- Really Easy
- Less than 15 mins
Quite simple, just plug-in the new one
Was this helpful?
Thank you for voting!