RA520W1 Hotpoint Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Could not find the correct replacements (burners & drip pans)
13 of 21 people
found this instruction helpful.
-
Barbara from JEFFERSON, GA
- Very Easy
- Less than 15 mins
After months of buying the wrong parts & cost I discovered this site So easy to order & quick delivery, plus very easy installation. Thank you. I also wanted to add that the reps (Tanisha & Matthew) were extremely helpful & informative. I can only hope all the reps equal their performance. I will definitely be using this site, before an
... Read more
y other source. Knowledge & cost is also important to me & that need was met. Good job!
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Large burner would not heat
5 of 6 people
found this instruction helpful.
-
Charles from Carthage, NY
- Really Easy
- Less than 15 mins
-
Nutdriver
I ordered the wrong part to start with. (READ CAREFULLY!) I reordered the correct part and it was simple. I unpluged the old element, plugged in the new one replaced the drip pan and trim ring and we were back cooking.
Service was fast, lady I spoke with on the phone to exchange parts was knowegable and nice. Great people to deal wi ... Read more th.
Service was fast, lady I spoke with on the phone to exchange parts was knowegable and nice. Great people to deal wi ... Read more th.
Read less
Was this helpful?
Thank you for voting!
Have tried 3 different store-bought drip pan sets over the past year. None of them laid flat.
10 of 25 people
found this instruction helpful.
-
Jennifer from Saginaw, MI
- Really Easy
- Less than 15 mins
Simple installation of new pans and all are level! Thank heaven! Thank you, PartSelect!
Other Parts Used:
Was this helpful?
Thank you for voting!
A tenant left the Drip Bowls in an uncleanable state. I could not find a suitable replacement..
3 of 4 people
found this instruction helpful.
-
Larry from SACRAMENTO, CA
- Very Easy
- Less than 15 mins
Most trainable people can pull out the heating elements and replace the Drip Bowls. The great thing about the ordered drip bowls was that they FIT! Most drip bowls sold as easy replacements for GE or Hotpoint appliances do not fit and wobble the heating element or drip bowls. If not fitting correctly, the tenant usually destroys the he
... Read more
ating element and the drip bowl.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Drip pan was ruined by renter
1 person
found this instruction helpful.
-
Karilyn from KEWADIN, MI
- Very Easy
- Less than 15 mins
I ordered a new drip pan. Piece of cake. Stove looks new again.
Was this helpful?
Thank you for voting!
Needed new drip bowl, was very hard to find one that fit my stove
1 person
found this instruction helpful.
-
Rosemary from BROOKFIELD, CT
- Very Easy
- Less than 15 mins
Installed easily, was most impressed with the speed of delivery and it was the perfect size!!
Was this helpful?
Thank you for voting!
the drip bowls were worn out
1 person
found this instruction helpful.
-
linda from STANTON, MI
- Very Easy
- Less than 15 mins
simply replaced them.
Other Parts Used:
Was this helpful?
Thank you for voting!
Drip bowl from a big box store was too big even though both say 8”.
1 person
found this instruction helpful.
-
Kathleen from INCLINE VLG, NV
- Very Easy
- Less than 15 mins
Ordered the part and set it in.
Was this helpful?
Thank you for voting!
bake element oven melted and replaced
1 person
found this instruction helpful.
-
Jeffrey from ELKTON, MD
- Very Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
Bake element melted when food fell on the hot element during cooking. Element melted. Nutdriver removed two screws on back panel of oven. Unscrewed two wires on old element. Screwed two wires to new element. Nutdriver two screws to back panel of oven. Done. Test new element.
Was this helpful?
Thank you for voting!
Old unit was bent and didn't work properly
1 of 2 people
found this instruction helpful.
-
Christine from Danbury, NC
- Really Easy
- Less than 15 mins
I unplugged the old unit and plugged in the new one! It works.
Was this helpful?
Thank you for voting!
coils with tips damaged
1 of 2 people
found this instruction helpful.
-
Jose from The Woodlands, TX
- Really Easy
- Less than 15 mins
it was very easy, a few seconds and new range for a cuople of years more!
Other Parts Used:
Was this helpful?
Thank you for voting!
burner broke apart under a pot
0 of 1 people
found this instruction helpful.
-
Mary from south bristol, ME
- Really Easy
- Less than 15 mins
Pulled out the burner. Just pulled and out it came. Looked you up online. Crawled around on the floor trying to find the model number. (This was the hardest part of the whole process.) Ordered the part; it came the very next day despite the fact that I didn't order special shipping. Unpacked the part, plugged it in. And it worked!!!!
... Read more />
FABULOUS service. Thank you so much.
... Read more />
FABULOUS service. Thank you so much.
Read less
Was this helpful?
Thank you for voting!
Live in an apartment and they had generic drip pans on the stove causing pots to tilt when cooking.
0 of 1 people
found this instruction helpful.
-
Jennifer from Cleveland, OH
- Really Easy
- Less than 15 mins
Replaced drip pans that the apartment Superintendent had in place with the correct drip pans and now cooking is beautiful again! No more uneven cooking on the stove top.
Other Parts Used:
Was this helpful?
Thank you for voting!
metal "Y",shape metal long arm attached to burner came loose.holding the coil to burner
1 of 4 people
found this instruction helpful.
-
Audret K, from San Diego, CA
- Really Easy
- Less than 15 mins
just plugged in the two prings into burner into outlet. Very simple and quick.
Was this helpful?
Thank you for voting!
Finish coming off of bowls
0 of 2 people
found this instruction helpful.
-
Robert from Ledyard, CT
- Really Easy
- Less than 15 mins
Removed burner from each one. removed drip bowl. Inserted new bowl. Replaced burner. Excellent help from order people so I got the correct bowl was irreplacable.
Other Parts Used:
Was this helpful?
Thank you for voting!