R3250 Ridgid Circular Saw - Parts

This is an authentic Ridgid replacement part that has been sourced from the original manufacturer to be used with dual blade saws. The metal screw is commonly used to fasten the blade guard handle to the lower guard assembly. This item is available as an individual replacement part, please note a philips screwdriver is required to install this item.

This is an authentic Ridgid replacement part, sourced from the original manufacturer for use with dual blade circular saws. The pan head screw is commonly used to fasten the back of the auxiliary handle assembly. This screw is available as an individual replacement part, please see illustrated diagram for associative parts.

This is an authentic replacement part that has been sourced from the original manufacturer to be used with twin blade circular saws from Ryobi and Ridgid. The metal wrench is an accessory that is used to tighten/loosen the bolt when changing the blade. This item is available as an individual replacement part.

This is an authentic Ridgid replacement part that is sourced from the original manufacturer to be used with dual blade saws. The blades connect to the saws spindle assembly and are used to make smooth cuts through material. This item is available as an individual replacement part, please see illustrated diagram for associative parts.

This is a genuine manufacturer sourced wax stick. It is specially produced for use with Ridgid twin blade saw. When cutting into soft metals (i.e., aluminum, copper, stainless steel, etc.) use the wax stick so the saw blade teeth don't "dry cut" and clog. Please note, this wax stick is sold individually. Applying it is extremely easy by ...Read morefollowing simple instructions: • Remove the cap on one end of the wax stick • Insert the uncapped end of the stick into the wax stick holder • From the blade side of the saw, turn wax dial counter-clockwise to apply wax to the blade