R209HK Sharp Microwave - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
microwave turn table motor was not working at all. so food cooked unevenly.
ordered part, removed two bottom-front screws that hold the bottom plate of microwave closed (note back of plate is on hinges so it stayed attached to microwave when we opened it.unplugged broken motor, plugged in new motor,replaced the two screws and...yeh!!! works like new. Thanks for the suprisingly rapid delivery of this part.We give your company five stars for service, delivery, and the very small part needed.!!!
Parts Used:
-
Margie from Shelby Township, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
6 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wave guide cover was dirty and broken, arcing.
removed old wave guide cover, cleaned out area behind it and all around. Tried to insert new cover, but it was difficult to put into place, so tried to bend it very slightly and it cracked. got it in anyway and microwave is working fine.
Parts Used:
-
Carol from Brooklyn, NY
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!