My Orders
R-1512 Sharp Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
microwave turn table motor was not working at all. so food cooked unevenly.
6 of 12 people
found this instruction helpful.
-
Margie from Shelby Township, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
ordered part, removed two bottom-front screws that hold the bottom plate of microwave closed (note back of plate is on hinges so it stayed attached to microwave when we opened it.unplugged broken motor, plugged in new motor,replaced the two screws and...yeh!!! works like new. Thanks for the suprisingly rapid delivery of this part.We give
... Read more
your company five stars for service, delivery, and the very small part needed.!!!
Read less
Was this helpful?
Thank you for voting!
lcd on sharp r1514 mircowave was illegible
2 of 3 people
found this instruction helpful.
-
Stephen from Brisbane, CA
- A Bit Difficult
- 15 - 30 mins
-
Screw drivers
Normal phillips screwdriver used for everything. Unplug microwave, remove top grille (3 screws in grille), remove 1 screw from just above and to the right of the display. Lift panel up, and replace with new board. Have to unplug about 7-8 items and a strip. Would be able to do again in less than 10 minutes, but first time took about 20-25
... Read more
minutes after spending a couple of hours researching. (some of the research was misleading as you DO NOT have to take the microwave down from range if just accessing control panel)
Read less
Was this helpful?
Thank you for voting!