My Orders
- Home
- PWE23KSKCSS
- Instructions
PWE23KSKCSS General Electric Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
refrige ws too cold
-
Jeffrey from Saint Charles, IL
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
as per video
Was this helpful?
Thank you for voting!
Fridge was freezing food near the back, adjusting internal temp not fixing the problem
-
Zachary from Decatur, GA
- Easy
- Less than 15 mins
-
Pliers
Unplugged the refrigerator first....then on the inside of the fridge, I popped the temp sensor cover off (upper LH side) and exposed the old sensor. I snipped off the old sensor about 3" down from the end and connected the new sensor (which I trimmed down to about 3" long) with some heat shrink wire nuts/connectors. Let the fridge run for
... Read more
a day or so and confirmed the problem was solved! Oh yeah, there was no way to tell the 2 wires apart (power vs. ground) on the sensor. However there was a manufacturer's stamp on the wires. So note the orientation of the text and mark one of the wires with a sharpie on both the old and new sensor before trimming. This will give you a reference for which wires to connect when adding the new sensor to the old wires.
Read less
Was this helpful?
Thank you for voting!