- Home
- PSB9240SF5SS
- Instructions
PSB9240SF5SS General Electric Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light on hood of microwave burned out.
-
Shirley from Collins, MS
- Easy
- Less than 15 mins
-
Screw drivers
Removed tiny screw from under the microwave that held the lid shut where the light was located. Took out old bulb and replaced with new one. Very easy!!!!
Was this helpful?
Thank you for voting!
Knob became worn.
-
Joseph F from Clarkston, MI
- Really Easy
- Less than 15 mins
Couldn't find the exact part using the online service but called and the customer service operator got me precisely what I needed - she was fast, friendly and very helpful. I had a great overalll experience.
Was this helpful?
Thank you for voting!
Burned out bulbs
-
Arthur from Boynton Beach, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
One screw out - drop panel - remove and replace bulbs!!
Was this helpful?
Thank you for voting!
Both Nite lights burned out, again.
-
Karen from Berea, OH
- Really Easy
- Less than 15 mins
-
Screw drivers
So simple, unscrew the hatch underneath the microwave oven, pull out old bulbs, and insert new.
Was this helpful?
Thank you for voting!
Surface lights burned out
-
Robert from Las Cruces, NM
- Really Easy
- Less than 15 mins
-
Screw drivers
Opened the cover. Removed burned out bulbs. Ordered replacements which arrived fairly quickly. Forgot to turn off power to unit (didn't matter in the end!). Using the bubble wrap the new bulbs came in, I inserted the bulbs one by one into their respective sockets. Not really tricky but the surface light is in the back of the microwave so
... Read more
I had to lean over the stove to get all the way back. Once in the bulbs worked fine. Closed the cover. All back to normal.
Read less
Was this helpful?
Thank you for voting!
light bulbs burned out
-
Kim from Poway, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
Used screwdriver, removed cover, took out old bulbs and replaced with new ones. Couldn't get any easier.
Was this helpful?
Thank you for voting!
Light bulb replacement
-
Fadel from Visalia, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
Buying the bulb and doing the replacement my self was the best thing I had done. The same problem happened last year and I had the American Home shield insurance at that time so I called the company and they took three weeks between ordering and replacing the light, they showed me the final bill and it was $240.00....!!! This time I bough
... Read more
t the light through partselect, got it within 48 hours and did he replacement myself within 15 min, I followed the instructions on the video and had to do an extra step ( due to the model I have) but I was able to replace the bulb and yooohooo it was working when I reconnect the power... I am a person who never tried to fix any electrical appliance before, but after this experience I will always try to do it myself... Believe me if I can do it and felt it was easy you can do it.... Thank you Partselect.... I can't speak high enough about you
Read less
Was this helpful?
Thank you for voting!
Quit working
-
William from Socorro, NM
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Just like the directions said. Very simple.
Was this helpful?
Thank you for voting!
microwave won't heat
-
Stephanie from Kernersville, NC
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
bought a fuse but that didn't solve the problem. Guess I need a new microwave
Was this helpful?
Thank you for voting!
Light Bilbao burned out
-
Stephen from Kennett Square, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
Simple repair..took off covering with screwdriver removed the halogen bulb and replaced with the one I ordererd..wish all repairs went so well..
Was this helpful?
Thank you for voting!
both lights burned out, used for 8 years or more
-
diana from lincoln, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
My daughter hand installed bulbs without a problem, took a minute and used a phillips to reinstall the cover. I shopped on-line because I wasted two hours between Lowe's and Home Depot trying to get the right bulb. I did think your postage was crazy high, otherwise glad to get the right bulbs to solve the problem.
Was this helpful?
Thank you for voting!
bulb replacement
-
andrew from malta, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
opened door, removed and replaced bulb
Was this helpful?
Thank you for voting!
circuit shortage shows, i thing it because i heat on the counter too long cause the thermotart not fumctional.
-
Rong from Portland, OR
- Really Easy
- Less than 15 mins
it work ok now
Was this helpful?
Thank you for voting!
Halogen Ligjt bulb needed replacing
-
Rosalie from Oakdale, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
We followed the instructions on your website and it was very quick and easy. Thank you so much for having that information and showing exactly how to replace the Halogen Light Bulb.
Was this helpful?
Thank you for voting!
Interior lightbulb needed to be replaced
-
Jean from Princeton, NJ
- Really Easy
- Less than 15 mins
-
Screw drivers
I could not for the life of me figure out how to get into the light housing so I could replace the bulb, nor did I have any idea which bulb to buy. The manual for this model descibes how to replace the underside lighting but they seem to have left out instructions about the interior. I watched the short "how-to" video on this site, boug
... Read more
ht the bulb that was described and replaced the bulb in five minutes without any issues.
Read less
Was this helpful?
Thank you for voting!