PPLGT2248 ((960480093-00)(2015-09)) Poulan Lawn Mower - Parts

This genuine OEM compression seat spring provides support and cushioning for the seat of your lawn equipment. It also effectively absorbs shocks and vibrations from uneven terrain. Typically, you can find it connected to the seat frame on the fender of your machine. If one or both springs are broken, your seat may feel unstable or uneven,...Read more compromising your comfort. It is essential to replace any damaged springs to restore a smoother ride. To replace the spring, gather a socket or wrench. Ensure your machine is turned off and engage the parking brake. Consult your user guide to locate the spring, which may be accessible from the underside of the seat or by removing the seat cushion. Use the socket or wrench to remove the fasteners securing the spring. Lift the spring off your machine carefully. Remember, different springs are used in your machine, so refer to the parts diagram to order the correct part. Also, note that this replacement part is sold individually, so confirm how many springs your machine requires beforehand.

This is a genuine OEM sourced replacement anti-sway bar designed for use with riding lawn mowers/tractors. Anti-sway bar fastens to the mower deck and frame to reduce side-to-side movement of the mower deck. It is made out of metal and it is sold individually. To complete this repair you would need pliers.

It is a genuine OEM component which is supplied for use with Husqvarna and Poulan riding lawn mowers and garden tractors. This item provides an identical replacement for a damaged or a missing part that was installed on a new unit. The deck is equipped with a washout port on its surface as part of its deck wash system. It should be utiliz...Read moreed after each use. This coupling quick content allows a user to attach a garden hose to the washout port on the deck. One durable plastic coupling is included. Note, the metal washout port is sold separately. Replacing it is a simple task that does not require any special tools.

The screw with hex washer attaches to the pivot bracket assembly. This item is available as an individual replacement part. This genuine part is supplied by the original equipment manufacturer for use with Craftsman lawn tractors and lawn mowers. A wrench will be necessary during the installation of this item. It is made of metal and will require replacing if it becomes broken or stripped.

This lightbulb is supplied by the original manufacturer and intended for use in lawn tractors and riding mowers with a 12-volt system. It is positioned on the front of the equipment as part of the equipment lighting system. The lightbulb illuminates the area allowing for improved visibility when working in low-light conditions. The lightb...Read moreulb can fail due to various reasons, such as burnout, electrical issues, or physical damage. Once the lightbulb stops functioning, visibility will be reduced which makes it difficult to safely operate the equipment. Before you begin the repair, disconnect your equipment from the power source to avoid electrical hazards. Remove the bulb housing cover, and carefully unscrew the old bulb. Thread the new bulb into the housing and ensure that it is securely seated. Finally, reattach the housing cover, reconnect the power supply, and test the new bulb. Note that this bulb is part of a dual usage system, therefore ensure that you order at least two as each bulb is sold individually.

This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal sector gear is used to link the pinion gear on the steering shaft to the left and right drag links. This item is used to allow the steering shaft to turn the front wheels in the same direction the shaft turns. This item is available as an individual replacement part.

This is a genuine OEM replacement part, sold individually. V-belt drive systems, also called friction drives (because power is transmitted as a result of the belt's adherence to the pulley) transmit power from a drive to a driven shaft. They are easy to install, require no lubrication, and dampen shock load. It is compatible with the mowers and lawn tractors listed below.

The oil drain valve connects to the easy oil tube drain and the oil pan and helps to drain the oil out of the engine. This part is made out of metal and is available individually. It will need to be replaced if it becomes broken and a set of pliers may be needed when replacing this part. This valve is an original part from Ryobi and Husqvarna for use in ride lawn mowers and lawn tractors.

A genuine item that is supplied by the original equipment manufacturer for use with lawn and garden equipment. It is a high-quality screw which has a few different applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and application of this hardware. Keep in mind this durable metal component is sold individually.

This is a genuine replacement belt sourced from the original manufacturer, designed for use with riding lawn mowers and tractors. Made from durable rubber and sold individually, this belt is responsible for driving the mower blades, making it a key component for effective cutting performance. To ensure optimal operation and extend the lif...Read moree of the belt, it’s important to clean the pulleys before installation. Regular inspection is recommended, and the belt should be replaced if it becomes worn or stretched. A set of wrenches is required to complete the installation.

This is a genuine Husqvarna replacement part sourced directly from original equipment manufacturer for use with lawn mowers/tractors. It is commonly used in riding mowers to keep the gauge wheel in place. This is a hex head bolt which requires a wrench for installation. It is sold individually.