PPB335 (Type 1) Poulan Trimmer - Parts

This Genuine OEM fuel filter is designed to maintain the performance and longevity of your equipment by preventing dirt and debris from entering the carburetor. Located inside the fuel tank, this essential component ensures clean fuel delivery, protecting the engine from potential damage caused by contaminants. Sold individually, the filt...Read moreer is built to meet original equipment standards for fit and function. Over time, the filter may become clogged, restricting fuel flow and making engine starts more difficult. For optimal performance, it should be replaced—not cleaned—at the first sign of blockage or wear.

This Fuel Line is a 25-inch, clear, plastic line used to deliver fuel. It requires a screwdriver, pliers, socket set, and nut driver and is rated as "Easy" to install by customers. If the fuel line wear out to the point of breaking, cracks and/or leaking will appear and the part should be replaced. Refer to your make, model and diagram to ensure this is the correct part for you.

The Fuel Line Fitting is a plastic part which attaches two pieces of fuel line together. If broken due to damage/fatigue, there may be a leak and the part must be replaced. Installation is rated as "Easy". Refer to your make, model and diagram to ensure this part is correct for you.

Also referred to as a Recoil Spring, this OEM replacement part is used to rewind the pull rope back into the starter housing. This Spring is sold individually, not as part of a kit or assembly, and is made of metal. If the pull cord will not retract into the housing, inspect the Recoil Spring for signs of wear or damage, replacing if ne...Read morecessary. You will need a screwdriver to complete this repair. Customers rate this repair as Easy.

This genuine OEM carburetor intake boot adapter is a rubber replacement part used in trimmers to connect the carburetor to the carburetor adapter. It ensures a proper seal and allows the air-fuel mixture to flow into the combustion chamber. Over time, the boot adapter may wear out, warp, or develop cracks. Signs of a broken boot adapter i...Read morenclude air or fuel leaks around the carburetor and engine issues like rough idling, stalling, or misfires. Using a damaged boot adapter can lead to reduced power and premature wear. To replace the boot adapter, you will need a screwdriver, pliers, a wrench, and a nut driver. Consult your user manual for guidance on accessing the carburetor through the airbox housing. Remove the air filter and airbox base, then locate and remove the faulty air intake boot from the carburetor. Please keep in mind that this boot adapter is not included with the carburetor kit or the carburetor adapter

This is an authentic OEM sourced replacement part designed for use with handheld lawn and garden equipment. This is a standard hardware which has multiple applications depending on the equipment. Please make sure to check appropriate diagrams for correct location and use of this item. One hex socket head screw is included per order.

This is an authentic replacement part supplied from Poulan. It is generally used with gas powered chainsaws. This nut in conjunction with a bolt (sold separately) helps to secure air filter and carburetor. Requires a wrench installing/removing this item. It is sold individually.

This is a standard hardware which has multiple applications based on your tool. It is sourced from original equipment manufacturer for use with a variety of power equipment. Please refer to diagrams for proper application. This screw is made out of metal and it is sold individually. Requires a hex key or an allen wrench to install or remove it.

This is a genuine OEM sourced replacement flexshaft that is specially designed for Husqvarna and Poulan trimmers and edgers. It fits inside the drive shaft housing to drive the cutting head. It is made from durable metal and it is sold individually.

This genuine replacement coupler is sourced from the original manufacturer and is designed for use with trimmers from Poulan and Husqvarna. It connects the upper and lower sections of the drive shaft assembly, ensuring a secure and stable link for proper power transmission. Ideal for routine maintenance or repairs, this coupler is sold individually and is built to meet OEM standards for fit and performance.

This is an original replacement part manufactured for use with trimmers. The special bolt is used to fasten the muffler to the cylinder. A hex key is required to install the bolt, and it is sold individually.