PP962TM3WW General Electric Cooktop - Parts

This part is sold individually and is for ranges. The control switch turns the surface element on and off and determines the temperature of the element. This will need to be changed if the control switch has failed and the cooktop is not turning on. It is found underneath the glass cooktop. Before beginning, make sure the circuit breaker ...Read moreis off. You will need to remove the cooktop from the counter. To do this you will need to go underneath and see what kind of brackets are holding it in place. The brackets will vary depending on the make and model and type of countertop is it laying on. These brackets will need to be removed.

This screw is sold individually.

This replacement haliant surface element is designed for use with flat-top ranges and cooktops, positioned beneath the glass surface to supply consistent heat to the cooking area. Measuring approximately 12 inches in diameter, it provides reliable performance for a variety of cooking tasks. If the burner fails to light when activated, the...Read more surface element may be faulty and require replacement. Installation involves disconnecting power to the appliance, removing the screws securing the cooktop, lifting the glass surface, and replacing the element by disconnecting the wires and securing the new unit in place. This component is sold individually and is compatible with select models of electric ranges and cooktops.

Sold Individually. This knob takes a double-flat shaft.

This roll contains 108 inches of tape.

This dual radiant surface element is designed for ranges and cooktops with a smooth glass surface, delivering reliable heat for your cooking needs. Measuring approximately 9 inches in diameter, it features two heating zones—an inner and outer ring—controlled by the burner knob to accommodate different pan sizes. Operating at 240 volts, th...Read moree element provides dual wattage options, typically 1900 watts for the outer ring and 800 watts for the inner ring, ensuring efficient and even heating. Common issues resolved by replacing this part include no heat, uneven heating, or only one ring functioning. Installation requires disconnecting power at the circuit breaker and lifting or removing the glass cooktop to access the element. This OEM component restores optimal cooking performance.