All Installation Instructions for General Electric Cooktop PP912SM4SS

The knobs that came with the range when we bought it from Lowe's were made of plastic. The foil fronts melted off from the heat of the range and burners.

19 of 26 people found this instruction helpful.

Larry from Marietta, GA
Really Easy
Less than 15 mins

Removed the old knobs and pushed on the new ones. Easy

Was this helpful?

Stovetop radiant burner went out

6 of 10 people found this instruction helpful.

Frank from Marietta, GA
Easy
15 - 30 mins
Screw drivers

Turned off power at circuit breaker. Disconnected electrical connections from stove and lifted stove top out of counter. Removed glass top by removing about 8 screws from side of stove top.Replaced burner element and replaced glass top.

Was this helpful?

Element broket

4 of 5 people found this instruction helpful.

Marco Antonio from CORP CHRISTI, TX
Really Easy
Less than 15 mins
Nutdriver

1.- going online to orden part 2 disconnect the power from the aplaince shoot Dow the power 3 tear down the appliance and disconnect the four terminals from the damage part reconnect the terminals to th new part reensamble the appliance and ready to go save $275 bucks in handy man labor

Was this helpful?

The selector knob inside is broken

1 of 3 people found this instruction helpful.

Geertruida from LOMA LINDA, CA
Really Easy
Less than 15 mins

The selector knob came as the original that fit execly easy.

Was this helpful?

8 Inch Burner Inop.

DONNA from EAST MEADOW, NY
Really Easy
15 - 30 mins
Socket set

Remove range top [ten phillips screws] remove electrical connectors and lift out burner. Reverse procedure for installation.

Was this helpful?

Swap white knobs for stainless

Charles from Boynton Beach, FL
Really Easy
Less than 15 mins

First needed to eyeball the socket underneath to make sure the pin fit the knob we were buying. It was great to have the underside view on the website.

Was this helpful?

PP912SM4SS General Electric Cooktop - Instructions