PP310 Poulan Chainsaw - Parts

This is a genuine OEM supplied replacement carburetor kit. It is used on gas powered chainsaws. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. This kit includes a metal body carburetor and a plastic heat dam. Please note gaskets are sold separately. If the engine won\'t start and the tank is full o...Read moref fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem. To complete this repair you would need a screwdriver. • Remove the rear cover • Remove the carburetor • Remove the fuel filter • Install the fuel filter • Install the carburetor • Re-assemble and test the unit

This is an authentic OEM sourced part that is intended to be used with chainsaws from Poulan, Husqvarna, and Jonsered. Overtime ethanol in gasoline can deposit residue in the carburetor, and it can eventually become clogged and will cause engine performance issues. The kit includes the recommended parts to be replaced when cleaning and re-building a damaged carburetor.

This metering diaphragm is an original part for use in edgers, blowers, trimmers, and chainsaws made by Poulan, Paramount, Weed Eater, Husqvarna, and Jonsered. It fits between the metering diaphragm gasket and the metering diaphragm cover. It is made of a thin material and will need to be replaced if it breaks. A screwdriver may be needed when replacing this part and keep in mind that it is sold individually.

This is a genuine manufacturer-sourced replacement part which is specially designed for use with Poulan and Husqvarna lawn and garden equipment. It is a standard hardware which has multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this screw. Keep in mind this high-quality item is made of durable metal and is sold individually.

This fuel pump diaphragm, also called a membrane or a gasket, is what helps pump fuel from the tank to the engine of your gas-powered lawn equipment. It is normally found attached to the carburetor assembly itself. You can tell that the diaphragm is broken when your engine is not starting properly, lacks power, or frequently stalls. You m...Read moreay also notice that your machine is leaking fuel or smells strongly of gasoline. A broken diaphragm could lead to engine performance problems, and it may eventually stop working altogether. When replacing your old diaphragm, you will need a wrench to disconnect it from the fuel pump housing. Kindly note that this OEM-sourced component is sold individually.

The spike is designed to provide a tight grip on the material when performing a cutting job. This is a genuine manufacturer-supplied component that is made for use with Poulan, Husqvarna and Jonsered chainsaws. It is a high-quality replacement for a missing or a damaged part that was installed on a new unit. To ensure the proper replaceme...Read morent and the correct application, check the owner's manual and the diagrams for your model. Note, one durable metal spike and two screws to secure it are included. A screwdriver will be needed to repair this component.

This replacement screw is an authentic OEM sourced hardware that is designed for use with Poulan and Husqvarna chainsaws. It is used to secure the air filter element. This screw is made from durable high quality metal and it is sold individually.

This is an authentic part that is specially manufactured for use with Craftsman handheld lawn and garden equipment. The starter grip attaches to the rope to provide a user with a comfortable grip to pull start the engine. Check the owners manual and the appropriate diagram of your model for the correct application of this part. This high-quality component is made of durable plastic and is sold individually.

This red and black OEM switch is an important component of your handheld lawn and garden equipment, allowing you to easily turn it on or off. The specific location of the switch can vary depending on the model and make of your machine, so it is advisable to consult your user manual for guidance. As the switch is used over time, it can wea...Read morer out and potentially fail. If the switch is broken, you will not be able to start your machine, and you must replace it immediately. To remove the switch, you will require either a screwdriver or needle-nose pliers. If the switch housing is secured with fasteners, unscrew them first. Then carefully pry the switch out of its housing and disconnect the attached wires. Please note that this switch is sold individually.

This is a genuine OEM sourced replacement screw designed for use with Husqvarna and Poulan chainsaws. This screw has multiple applications depending on the tools model. Please make sure to check appropriate diagrams for correct use and location of this hardware. Keep in mind, this Torx screw is sold individually.

This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with chainsaws. The special pulley is used to house the starter rope and support the starter spring. This pulley is available as an individual replacement part, please see model diagram for associative parts.

This is an original replacement part manufactured for use with chainsaws and leaf blowers. The washer is commonly used to disperse the pressure put on the flywheel by a nut across a wider surface area. This washer is available as an individual replacement part, please see model diagram for associative parts.