PP26E Poulan Trimmer - Parts

This 25-inch fuel line carries fuel from the tank to the carburetor, ensuring proper engine operation. Made from durable clear plastic, it is designed to withstand regular use but may become clogged or brittle over time. Replacing a worn or damaged line can help prevent leaks and restore reliable starting and performance.

This Genuine OEM fuel filter is designed to maintain the performance and longevity of your equipment by preventing dirt and debris from entering the carburetor. Located inside the fuel tank, this essential component ensures clean fuel delivery, protecting the engine from potential damage caused by contaminants. Sold individually, the filt...Read moreer is built to meet original equipment standards for fit and function. Over time, the filter may become clogged, restricting fuel flow and making engine starts more difficult. For optimal performance, it should be replaced—not cleaned—at the first sign of blockage or wear.

This is the Genuine Craftsman replacement part. It is made out of Flexible Rubber and is Sold Individually. The purpose of the 530069216 Tank Purge Line is to return the excess fuel that is in the carburetor after the primer bulb has been pushed. The excess fuel is forced through the purge line back into the fuel tank. Over time the Tank Purge Line will become brittle and crack and will need to be replaced.

This purge bulb is an authentic OEM part from Craftsman for gas blowers, trimmers, blowers and weed wackers. This part disperses fuel to the carburetor to provide starting the blower faster. You will need a screw driver to replace this part. This purge bulb is made of rubber and sold individually.

This is an OEM replacement part and is sold individually. Its purpose is to filter out dust and debris from contaminating the carburetor and engine. When replacing the filter you can open the package in comes in and put a bit of two cycle oil in the bag and let it absorb into the filter. Then remove it from the bag and squeeze it with a...Read more paper towel to remove the excess oil. This will aid the filter in filtering out the unwantables.

This is a genuine OEM approved replacement starter spring is specially designed for use with gandheld gas powered blowers and trimmers. The purpose of this spring is to retract the starter assembly on the engine, so it engages the drive cup on the flywheel to start the engine when pulled. This spring is made out of metal and it is sold individually.

This metal ring in your engine, known as the piston ring, seals the gap between the piston and cylinder wall. It makes sure that the gases produced during combustion do not escape and that the engine maintains the pressure it needs to run. If the piston ring is damaged, oil can seep into the combustion chamber, causing your engine to exhi...Read morebit rough idling and your machine emit blue smoke. To switch out a defective piston ring, detach the old ring from the piston with a screwdriver. When installing the new ring, you may need to compress it to make it fit properly. Please be aware that this genuine OEM replacement part is bought individually. It is recommended that you replace all the piston rings in your machine at once, as they tend to wear down at the same rate. Carefully review your user manual to determine how many rings your machine needs before placing your order.

This OEM spool cover is designed to protect your trimmer spool and keep it free from damage and debris. It securely holds the trimmer line in place, preventing it from unraveling while you operate the trimmer. The cover, made of plastic, is located at the bottom of the trimmer head. If the cover is broken, you may notice cracks, chips, or...Read more missing parts. This can result in tangled or improperly feeding trimmer line. Furthermore, exposing the spool and line increases the risk of damage and accelerates wear. You will not be able to trim evenly or precisely. Replacing a broken spool cover is a simple task that requires no tools. Just remove the old cover and snap the new one on. Please keep in mind that the spool cover is sold separately from the spool.

This is a genuine Craftsman part for use with Trimmers. The line tap knob releases the cutting line when you bump the knob on the ground while the spool is turning. The most common reason for replacing the bump knob is when bumping the knob against the ground no longer causes the spool to release more line. This part is sold individually....Read more The tool that you will need to replace the line tap knob is a flat-head screwdriver.

This is a standard hardware which has multiple applications based on your tool. It is sourced from original equipment manufacturer for use with a variety of power equipment. Please refer to diagrams for proper application. This screw is made out of metal and it is sold individually. Requires a hex key or an allen wrench to install or remove it.

This is a genuine Poulan replacement part, it is sold individually. The purpose of the 530038682 Trigger is to control the speed at which the spool and line rotates on the model shown below. It is connect to the Throttle Cable Assembly. Then to the throttle linkage on the carburetor.

Smooth trimmer operation depends on a straight shaft and a working drive cable. Replace the upper shaft kit if the tube is bent, the cable is worn, or the head turns poorly. First check both shaft connections and remove any grass wrapped around the cutting head. Confirm fit with the full tool model number. Review the parts diagram because...Read more kit contents may differ. Let the tool cool, remove its battery or spark plug wire, and keep all clamps and fasteners secure.