PO500S ((961120104-01)(2012-02)) Poulan Lawn Mower - Parts

This blade is sourced directly from the manufacturer for use in Craftsman and Husqvarna lawn mowers. The blade is the part of the mower that is responsible for cutting and mulching the grass. It is 22" long, made of black metal, is not part of a kit or assembly, and is sold individually. If you hit a hard object, you may bend the blade,...Read more causing a vibration. You may also have problems with the grass being cut as the blade dulls over time. If the blade is bent, damaged, or worn, it needs to be replaced. You will need a socket set to complete this repair. Customers rate this repair as Easy.

This Handle Bolt is sourced directly from the original equipment manufacturer for use in various lawn and garden equipment. It is used to secure the upper and lower handles together and is tightened by a knob on the other end. It is made of metal, is black, and is sold individually, not as part of a kit or assembly. This part will need ...Read moreto be replaced when it is worn or damaged and can no longer secure the arms together. No tools are needed to complete this repair. Customers rated this repair as Easy.

This genuine manufacturer sourced replacement part is designed for use with lawn mowers.It attached to the mower deck to protect your feet and legs from grass clippings and debris. It is made out of plastic and it is sold individually. Please note the brackets and hardware are sold separately.

This genuine replacement part is sourced directly from original manufacturer. It is used on a variety of lawn mowers. This is the knob that helps to secure the upper handle. It is made out of plastic and it is sold individually. When replacing this know you will need a screwdriver for the screw securing the knob.

This is an OEM replacement part for various models of lawn mowers. This part connects the blade to the shaft, is made of metal, is silver, is not part of a kit or assembly, and is sold individually. It will be found on the shaft of the mower, where the blade attaches. If your blade can no longer be supported and held on the machine, you ...Read moreshould inspect the Blade Adapter for signs of wear or damage, replacing it if you find any. You will need a socket set and wrench set to complete this repair. Customers rate this repair as Easy.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mower blade and the blade bolt/screw. This part should be replaced if you notice any visible wear, warping, or damage. You will need a wrench or socket set to complete this repair. Customers rate this repair as Easy.

This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and use of this item. This part is made of h...Read moreigh-quality metal and it is sold individually, you will need a wrench to secure or remove it.

This is a genuine OEM sourced part that is specially made for use with Husqvarna and Weed Eater lawn mowers. It is the cable that stops the blade when the control handle is released. Unfortunately, if the cable is broken it will cause the brake to not release even when the lever is pressed. Please make sure to refer to the owners manual a...Read morend the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality rubber insulated cable is sold individually.

This part is made of metal and is sold individually. The left handle wheel bracket support attaches to the lower handle and fits between the nut and the spacer. This is an OEM replacement part used in lawn mowers made by Weed Eater, Poulan, and Husqvarna. When replacing this part a socket set and a wrench set may be needed.

This is a genuine OEM sourced replacement discharge chute/guard. It is specially designed for use with a variety of walk-behind push lawn mowers. It is mounted to the side of the deck. The customer curved shape of this item will help to direct the grass trimmings away from the unit. This part is made out of black plastic and it is sold in...Read moredividually. Please note the hinge bracket assembly and spring to secure this guard are sold separately.

This is a genuine OEM sourced replacement part which is specially designed for use with Craftsman lawn mowers. It is a special spring for the clipping deflector, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.