EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

PLW8463W2B Amana Washer - Parts

1 - 12 of 181

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Retaining Ring – Part Number: WP23748
$12.85
In Stock
Retaining Ring
Part #WP23748
The metal retaining ring, which is under an inch long, holds the rear wheels on the axels of the dryer. The main reason why it would need to replaced is if the retaining ring has sprung out of place or is damaged. Some the symptoms could be that your dryer does not tumble, it makes a loud buzzing noise, or if it pumps, but will not spin. The tools needed for this project are a putty knife, 5/16 nut driver, and snap ring pliers. Refer to the installation video and diagram for further instructions and guidance. Customers ranked this replacement project as easy.
Thrust – Part Number: WPW10121334
$7.47
In Stock
Screw – Part Number: W11233072
$21.45
On Order
Screw
★★★★★
★★★★★
(6)
Part #W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
Dryer Screw – Part Number: WP90767
$7.47
In Stock
Dryer Screw
★★★★★
★★★★★
(2)
Part #WP90767
This screw is sold individually.
Washer Hose Clamp – Part Number: WP596669
$7.47
In Stock
Washer Hose Clamp
★★★★★
★★★★★
(1)
Part #WP596669
This appliance hose clamp holds a hose firmly against its connection to help prevent leaks and keep it from slipping loose during operation. It applies pressure around the hose where it joins a pump port or other fitting. A bent, broken, corroded, or weakened clamp may allow water to drip from the connection or the hose to detach. Replacing a damaged clamp helps restore a secure connection. Disconnect power and shut off the water supply before servicing, then check for leaks after reassembly. This is an OEM part sourced directly from the manufacturer.
V-Style Drive Belt (32.5 inches long) – Part Number: WP28808
$57.38
In Stock
V-Style Drive Belt (32.5 inches long)
★★★★★
★★★★★
(4)
Part #WP28808
This v-style drive belt is thirty-two and a half inches long and half of an inch wide.
Adjustable Leveling Leg – Part Number: 22003428
$17.15
In Stock
Adjustable Leveling Leg
★★★★★
★★★★★
(1)
Part #22003428
If your washer shakes or vibrates loudly when it reaches its max speed, make sure the 4 levelling legs are even. Adjust the legs so that the machine is level, and tighten the locking nuts on the legs that are threaded. Your washer should be kept as close to the floor as possible. Your model might have rear legs that level themselves, or it might have threaded legs all around. Make sure the rubber feet have not worn out. Replace any missing or damaged legs and feet. This genuine OEM replacement part is sold individually, so be sure to order the amount you need.
Hose Clamp – Part Number: WP285655
$9.62
In Stock
Hose Clamp
★★★★★
★★★★★
(2)
Part #WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
Lid Hinge Mounting Screw – Part Number: WPW10119828
$7.47
In Stock
Lid Hinge Mounting Screw
★★★★★
★★★★★
(2)
Part #WPW10119828
Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.
Drain Hose with Rubber Elbow – Part Number: WP40053901
$55.29
In Stock
Drain Hose with Rubber Elbow
★★★★★
★★★★★
(4)
Part #WP40053901
This hose attaches to the pump to help remove the water out of the washer. 7 feet in length.
Dryer Screw – Part Number: WPY014874
$7.47
In Stock
Dryer Screw
Part #WPY014874
Sold Individually.
Inlet Hose - 5 FT – Part Number: WP89503
$19.30
In Stock
Inlet Hose - 5 FT
★★★★★
★★★★★
(5)
Part #WP89503
This hose can handle hot or cold water and is five feet long.
1 - 12 of 181