- Home
- PER4100BAW
- Instructions
PER4100BAW Maytag Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
needed to replace stove pans and burner
3 of 6 people
found this instruction helpful.
-
Marylou from Sitka, AL
- Really Easy
- Less than 15 mins
An easy replacement job.
Service from you was prompt and the replacement parts arrived in perfect condition...thanks
Service from you was prompt and the replacement parts arrived in perfect condition...thanks
Other Parts Used:
Was this helpful?
Thank you for voting!
The broiler broke at the ends.
1 person
found this instruction helpful.
-
Linda from TROY, MI
- Really Easy
- Less than 15 mins
-
Screw drivers, Socket set
My daughter repaired it without any problems.
Was this helpful?
Thank you for voting!
Broken Coil
2 of 4 people
found this instruction helpful.
-
James H from Victor,, NY
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Very easy to install with the advanced instructions you provided.
Was this helpful?
Thank you for voting!
My original back leg broke because the floor is uneven. Had to pull it out several times.
1 person
found this instruction helpful.
-
Phyllis from BROWNVILLE, NY
- Really Easy
- Less than 15 mins
-
Wrench (Adjustable)
Put the back of stove on blocks of wood to get high enough to screw the new leg in.
Was this helpful?
Thank you for voting!
Couldn't find correct drip bowls that fit.
2 of 4 people
found this instruction helpful.
-
Lowell from Hardin, KY
- Really Easy
- Less than 15 mins
Removed old drip bowls, removed burners installed new drip bowls,installed burners. They fit perfect and I received them two days after ordering.
Other Parts Used:
Was this helpful?
Thank you for voting!
The old drip bowls were rusting, no chrome left
3 of 7 people
found this instruction helpful.
-
kathryn from piqua, OH
- Really Easy
- Less than 15 mins
Took the old ones out and put in the new ones! What I am so pleased about it that I just went online and at Parts Select website it was easy to find what I needed, a fair price and the 4 bowls arrived within 2 days!
Other Parts Used:
Was this helpful?
Thank you for voting!
burner would not heat.
1 person
found this instruction helpful.
-
Jackie from Hughes Springs, TX
- Really Easy
- Less than 15 mins
I unpluged the old burner and pluged the new one in. Repair done in about 2 min,
Was this helpful?
Thank you for voting!
replacing old drip bowls
1 person
found this instruction helpful.
-
Marion J. from Palmetto, FL
- Really Easy
- Less than 15 mins
It was so simple & the parts fit perfectly. I appreciated all the help from your sales lady. Thanks again.
Other Parts Used:
Was this helpful?
Thank you for voting!
Element was broken(literally).
2 of 4 people
found this instruction helpful.
-
Heidi from Lakeland, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
First, turn off the breaker to the range. Then just remove the 2 screws that hold the element at the back of the oven. Pull the wire connectors apart or push them off with a regular screwdriver. Instructions that I read said to make sure the wires don't fall back through the holes, but in our case the insulation held them in place. Reconn
... Read more
ect the wire connectors to the new element and reattach with the screws. Easy!
Read less
Was this helpful?
Thank you for voting!
burner receptacle failed (stove over 30 years old)
1 person
found this instruction helpful.
-
BETH from COUNCE, TN
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Took out burner (pulls out) Took out one screw that holds recep. in, cut the two old wires and attached new wires with wire nuts included in the new package.
Was this helpful?
Thank you for voting!
None at all.
1 person
found this instruction helpful.
-
Eileen from CAMAS, WA
- Very Easy
- Less than 15 mins
Just took the old one out and put the new one in. Very easy!
Was this helpful?
Thank you for voting!
Old seal breaking off oven door. Oven not baking food well, wasting heat and fuel.
1 person
found this instruction helpful.
-
Mz from COLUMBIA, ME
- Very Easy
- Less than 15 mins
-
Pliers
Used pliers to remove clips and old seal. Snap in new seal. DONE! Less than 5 mins.
Was this helpful?
Thank you for voting!
ELECTRIC BURNER SUPPORT FELL OFF AND BURNER SOMETIMES WOULD NOT COME ON.
1 person
found this instruction helpful.
-
RICHARD from SHOW LOW, AZ
- Very Easy
- Less than 15 mins
Stuck the new one into the plugin.
Was this helpful?
Thank you for voting!
Element caught on fire when oven was turned on. Burned off coating on element.
1 person
found this instruction helpful.
-
AmyKuta from GARLAND, NE
- Very Easy
- 15 - 30 mins
Turned off power to oven. Removed screws from each side of element. Removed connectors to disconnect old element. Connected new element to connectors. Replaced screws, then turned on power to oven. Turned on oven to heat. Easy install.
Was this helpful?
Thank you for voting!
Baking element went out on our cook stove.
1 person
found this instruction helpful.
-
David from VASSAR, MI
- Very Easy
- Less than 15 mins
-
Screw drivers
It was easy finding the part on line and the part was delivered within three days. It only took about 10 minutes to change element. I was so pleased with the product, that I just changed a thermostat on my parents stove which was purchased through parts select and that was very easy to change also.
Was this helpful?
Thank you for voting!