This turntable motor is for microwaves.
The turntable motor rotates the glass tray inside the microwave oven.
Because high-voltage capacitors in a microwave can retain a lethal electrical charge...
$114.20
In Stock
Order within the next 11 hrs and your part ships today!
Order within the next 11 hrs and your part ships today!
Questions And Answers for PEB7227AN3DD
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Velvie
October 7, 2022
My microwave will not heat or cook food- only 14 months old. Does this mean the megaton needs replacing?
For model number PEB7227AN3DD
Hello Velvie, thank you for contacting us. Before replacing the magnetron please inspect the high-voltage capacitor, part number PS12296267. Sometimes a faulty capacitor will not allow the magnetron to operate. Please take safety measures before testing it as it stores a large amount of charge. If the capacitor is good, the most probable culprit is a magnetron, part number PS16618683. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
My door will not shut all the way. I have checked the latches on the door and the spring looks like it's still attached and putting downward pressure. What else should I check?
For model number PEB7227AN3DD
Hello Dan, thank you for your inquiry. Based on our research, we would recommend checking the following parts to fix your issue: door hinge, part number PS12296161, door switch bracket, part number PS3486543, and lower hinge, part number PS12295174. Please reach out to customer service if you need help placing an order. Glad to be of help!
I ran my microwave accidentally for few seconds with nothing in it.It was working fine.Next day it stopped heating.What could be the problem?
For model number PEB7227AN3DD
Hi Jagruti, thank you for reaching out. Based on the description that you have provided, we would recommend checking the thermostat, part number PS11736329, the high-voltage transformer, part number PS16729009, and the magnetron, part number PS16618683. We hope this solves your problem!
Everything seems to be working fine but makes a rattling noise.
For model number PEB7227AN3DD
Hello Kraig, thank you for your inquiry. According to our research, the issue is most probably with the fan blade. We would recommend checking the fan blade, part number PS3491466, to fix the issue. Glad to be of assistance!
1. Take out the case by unscrew 8 screws on the back and side of the case 2. Take out the control panel by unscrew 1 screw on the top and slide up 3. Take out the latch by unscrew 2 screws, and slide out 3 electric switches that clipped on the latch 4. Clip the switches onto the new latch 5. Slide in lever switch into
... Read morelatch 6. Put back the latch 7. Put back the control panel 8. Put back the case
REPLACE SWITCH -STAND ON (NOT THE SWITCH-MONITOR) THERE ARE TWO OF THESE SWITCHES THE TOP ONE WAS DEFECTIVE. THE ON OFF SWITCH BUTTON ON THE SWITCH WAS BROKEN
Slide a Butter knife at left side by open push knob door will open. Then open all screws from top cover push cover top side front way then door locks Bracket have 3 microswitch pulls out switches mark them top medium and bottom. Remove 3 screws holding brackets will come out. On bottom see a Cam has 1/4” holes can holding Saft broken then
... Read more install new door lock bracket install microswitch put 3screw and slide Cam on saft . I put a small screw on saft to hold cam on place. There was no screw . That’s why cam saft was broke. Put top cover tight all the screws and door lock fixed.
