My Orders
PE-2201A Echo Edger - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Echo trimmer had narrow shield. Bought wider one which reduced rocks and debris
4 of 8 people
found this instruction helpful.
-
Robert from COEUR D ALENE, ID
- Very Easy
- Less than 15 mins
-
Screw drivers
Easiest repair ever. Turn the trimmer upside down so you can access the string assembly. Find the small hole in the shaft beneath the string assembly and insert a heavy gauge nail into it to hold the shat in place. Turn the string assembly counterclockwise until it comes off. Lift off the round metal piece that was under the string assemb
... Read more
ly.Find the 3 screws holding the shield in place and unscrew them. Pull the shield off. Install the new one in reverse order. I used the original hex screws as the new ones were philips head. Hex worked perfectly. I was amazed how easy thus was to do.
Read less
Was this helpful?
Thank you for voting!
I was missing the label for the choke on the air filter.
1 of 4 people
found this instruction helpful.
-
Aidan from THOMASTON, ME
- Easy
- 15 - 30 mins
I made sure everything was lined up and stuck it on.
Was this helpful?
Thank you for voting!