All Installation Instructions for General Electric Cooktop PCP932TM4WW

9" Radiant Element did not heat up.

I started by Unscrewing the range top. 2 small screws. I took off the old piece by unclipping the piece . Then I color coded each wire so that I would know exactly where I would place the wires for the new part. 30 min maximum time spent changing the part. Please don't forget to unplug the range before you start.

Parts Used:

Dual Radiant Element - 9 Inch

Andrea from ORLANDO, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

46 of 62 people found this instruction helpful.

Was this instruction helpful to you?

Element bad

Since this was the third time I did it all I had to take two screws out to lift the top of stove and replace element.

Parts Used:

Dual Radiant Element - 9 Inch

Cheryl from JOHNSONVILLE, SC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Small radiant wasn't working but large was.

Ordered the dual replacement. I am 76 so I had someone else do it. It took him about 15 minutes. Just pulled the oven forward about 8" so he could lift the top up. 2 Screws to release the top. Then just removed the part and plugged in the replacement. Rescrewed the top screws and pushed the oven back.

Parts Used:

Dual Radiant Element - 9 Inch

Joan from CLEMMONS, NC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Original heating Element was burned out

1st replacement part was damaged from Shipping.
Parts Select sent a new one that i received in only a few days.
our stove is slid into a granite island so the disassembly was not as simple as most. It was necessary to remove the controls, the controls housing & screws along the top of the oven door.
Within an hour the stove was back in place and working perfectly.
Great service from Parts Select

Parts Used:

Dual Radiant Element - 9 Inch

Janice from ST CLR SHORES, MI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Stovetop radiant burner went out

Turned off power at circuit breaker. Disconnected electrical connections from stove and lifted stove top out of counter. Removed glass top by removing about 8 screws from side of stove top.Replaced burner element and replaced glass top.

Parts Used:

Element Radiant 5.5 IN

Frank from Marietta, GA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

4 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Heating element burned out

Followed example on YouTube! Very easy.

Parts Used:

Dual Radiant Element - 9 Inch

William from CONCORD, MA
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

The middle of the element quit working.

Took the old burner out, tranferred the wires from old to new. Installed the new burner. Works fine.

Parts Used:

Dual Radiant Element - 9 Inch

Ruth Ann from New Columbia, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

one burner not working

Removed two screws to access burner. Removed three power clips from burner, reattached the clips to new burner, removed brace clips and attach to new burner, close lid and reattach stove cover.

Parts Used:

Dual Radiant Element - 9 Inch