My Orders
- Home
- PCB905SJ1SS
- Instructions
PCB905SJ1SS General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
F2 reading
-
lynn from sunnyside, NY
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers
Followed the instructions that were sent to me by E-Mail.
Was this helpful?
Thank you for voting!
oven not warming, f2 indicating overheat
-
David from Lisle, IL
- Really Easy
- Less than 15 mins
-
Nutdriver
Removed 4 screws from back panel, disconnected small electricsl connector from sensor, removed one mounting screw from sensor inside oven,pulled wires through and removed old sensor. Fed wires for new sensor through and connected electrical connector, installed panel, installed mounting screw on sensor and checked oven, worked like a cham
... Read more
p. Took 5 minutes.
Read less
Was this helpful?
Thank you for voting!
Flashing F2 and erratic temperature readings.
-
Kenneth from Salem, OR
- Really Easy
- Less than 15 mins
-
Nutdriver
Unplugged from wall outlet, then opened oven front door. Reached in and removed two screws. Pulled oven sensor threw and detached electrical connector from old sensor. Plugged in new oven sensor and reversed removal procedure. No more Flashing F2 and oven temperature came to ready. Very easy.
Was this helpful?
Thank you for voting!