All Installation Instructions for Poulan Lawn Tractor PBGT22H54

Right axle bent

1 person found this instruction helpful.

MATTHEW from PENNSBURG, PA
Very Difficult
30 - 60 mins
Pliers, Screw drivers, Wrench (Adjustable)

Replacing belt with no problem. I've ordered the front right axle spindle assembly three times. This is from your parts list and you sent me the part and they did not work at all.

Was this helpful?

Broken weld on right axle

1 of 2 people found this instruction helpful.

walter from EDINBURG, VA
Easy
30 - 60 mins
Pliers, Socket set

Removed wheel (used strong magnet to catch the keeper)
Removed axle assembly from its mounting tube
(used strong magnet again to prevent keeper lose)
Installed replacement axle (again with the magnet)
Lubricated with 90 SAE
Re-installed the wheel (used magnet again to hold the keeper.
Mowed the lawn.

Was this helpful?

Worn out Mandrel Assemblies

2 of 5 people found this instruction helpful.

Joseph from CANBY, MN
Difficult
More than 2 hours
Socket set

Remove Deck, Remove Blades, Remove guards and belt, use old belt to hold pully to remove pully (would be good to have pully wrench), Remove mandrel Assembly, Install new mandrel assemblies (had to tap the new mandrel assemblies. Should have been done by manufacturer.). Reinstall blades, guards, and belt. Put deck back on.

Was this helpful?

Dryer runs no heat

2 of 9 people found this instruction helpful.