My Orders
- Home
- PB975SM1SS
- Instructions
PB975SM1SS General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
burner quit working
-
William from Newport News, VA
- Easy
- 15 - 30 mins
-
Screw drivers
opened the oven door an took 2 screws out that hold the stove top down. lifted an propted it up an replaced the burner. pretty simple job just plug the wires in just like the old burner
Was this helpful?
Thank you for voting!
Only inner burner would heat
-
Frank from Northport, NY
- Easy
- 15 - 30 mins
-
Nutdriver
Pretty easy. Pull oven out from wall and un-plug. Open oven door and look up. Find two small sheet metal screws and remove. Remove two retainer clips, un-plug triple haliant element and install new part. Re-install retainer clips, replace screws and you are done.
Was this helpful?
Thank you for voting!
The biggest burner does not get hot. It goes red and then black very soon.
-
Xiang from Cary, NC
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
#1 loose two screws and lift up the cook top; #2 disconnect the burner coils by unplugging three connectors; #3 disconnect the switch attached to the burner by unplugging three connectors; #4 loose two screws to unmount the burner; #5 do the reverse to mount/connect the burner, and close the cook top.
Was this helpful?
Thank you for voting!