PAS10529ESS ((1696571-00)(2015)) Murray Snow Blower - Parts

This is an authentic OEM sourced component which is specially made for use with Murray and Snapper lawn and garden equipment. The part provides an identical replacement for a missing or a faulty capscrew that was installed on a new unit. It is a standard hardware which may have multiple applications, please make sure to refer to the appro...Read morepriate diagrams of your model for the correct location and application of this screw. Keep in mind this high-quality hex head capscrew is made of durable metal and is sold individually.

This item has been sourced from the original manufacturer to be used with lawn tractors from Murray. The metal washer is used with different types of mowers and the application of the washer can vary based on the model of the machine. This washer is sold as an individual replacement part.

The shear pin spacer sleeve goes between the auger and the snowblower screw. This part is priced individually. This is an authentic Craftsman replacement part that is sourced from the original manufacturer for use with snowblowers. A wrench may be needed during the replacement of this item. It is made out of metal and will need to be replaced if it breaks.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

This is a genuine OEM sourced replacement hardware designed for use with snowblowers. Shear bolts are installed in order to protect your unit. If the auger gets jammed or clogged, shear bolt is designed to snap at a certain point of pressure, so it will not damage any other part of the unit. It is made from metal and it is sold individually. You will need a wrench to remove or install this bolt.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

The pushnut retainer goes next to the ball bearing. This is available as an individual replacement part. This item is an OEM from Snapper, Murray, and Simplicity for use in lawn mowers, lawn tractors, and snowblowers. It might require a wrench to replace this part. It is made of metal and will need to be replaced if it breaks.

This is an authentic manufacturer-sourced replacement flat washer which is specially produced for use with Murray lawn and garden equipment. It helps to distribute the pressure evenly between connected pieces, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. This high-quality metal washer is sold individually.

This is a genuine Craftsman replacement part that is sourced from the original manufacturer to be used with snowthrowers. The metal hex nut is commonly used to fasten the bolt that secures the height skid to the auger housing. This item is available as an individual replacement part, please note four nuts may be required.

It is a genuine OEM sourced part that is specially produced for use with Murray and Snapper lawn and garden equipment. This is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. This high-quality carriage ...Read morebolt is made of durable metal and is sold individually, keep in mind the washer and other parts are all sold separately.

This OEM universal joint pin is used within various models of snowblowers to hold the rod and yoke together inside the deflector/chute assembly. If you notice excessive vibrations, clunking, or limited range of motion within the chute mechanism, it is worth inspecting to check for a broken pin or other internal damage. To prevent any futu...Read morere issues with your universal joint pin, make sure to keep it adequately clean and lubricated and inspected regularly. This pin is made of a high-quality metal, measures 1-inch long and .375-inches thick, and is sold as an individual part.