NS100 (Type 1) Porter Cable Nailer - Parts

This is an authentic manufacturer-sourced replacement part which is specially designed for use with Porter Cable nailers and staplers. It helps to provide an air-tight seal between connected components, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable rubber and is sold individually.

This is a Genuine OEM replacement part used on a variety of Power Tools. It allows to keep the Carrying Case closed. This part is made out of Plastic and it is Sold Individually. Included in part number 901023

This is an authentic OEM sourced component which is specially designed for Porter Cable staplers and nailers. It is an identical replacement for a missing or faulty rolled pin that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardw...Read moreare. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is a genuine OEM sourced replacement wrench which is specially designed for use with power tools. This component allows a user to secure or remove various hex socket head screws, it provides an identical replacement for a missing or damaged wrench which came with the new equipment. It is a high-quality part which is made of durable metal and is sold individually.

This is a genuine manufacturer approved replacement o-ring used on Porter Cable nailers/staplers. O-rings are designed to withstand high pressure by creating a seal between two connected parts. Over time o-rings will damage and should be inspected periodically. If parts are showing signs of wear they should be replaced. This is a rubber o-ring and it is sold individually.

O-rings are designed to contain thousands of pounds of pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. Of the many causes for O-Ring failure, the most common are: • Extrusion and Nibbling - O-ring has ragged, tattered edges. These are commo...Read morenly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • Abrasion - One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that is too rough, contains grit or is too smooth to allow lubrication. • Over Compression - O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • Heat Hardening - O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity. • Weather/Ozone Cracking - O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.

This is an authentic high quality item that is specially produced for Porter Cable nailers and staplers. This is one of the seals for the trigger valve assembly which is sold separately. Please note this durable rubber seal is sold individually.

O-rings are designed to contain thousands of pounds of pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. Of the many causes for O-Ring failure, the most common are: • Extrusion and Nibbling - O-ring has ragged, tattered edges. These are commonly...Read more caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • Abrasion - One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that is too rough, contains grit or is too smooth to allow lubrication. • Over Compression - O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • Heat Hardening - O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity. • Weather/Ozone Cracking - O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.

This is a genuine Porter Cable hardware which is sourced from the original manufacturer for use with nailers and staplers. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Refer to the diagrams for your model to ensure the exact location and the correct application of this component. Thi...Read mores high-quality part is made of durable metal and is sold individually. You may need pliers to remove and secure this pin.