MOBY Tanaka - Overview

This OEM replacement part is used to pump fuel from the tank to the carburetor in order to start the engine. It may also be referred to as a Primer Bulb. It is made of durable black plastic and is sold individually. This part will be found in various locations, depending on your model; refer to your owners manual to locate it on your mach...Read moreine, but is commonly found on the side of the air cleaner or carburetor. To complete this repair, you will need a screwdriver. The Purge Bulb needs to be replaced when it is cracked or damaged. It will become fatigued through regular use and may leak fuel when it is malfunctioning. Customers rated this repair as Easy.

This individually sold grommet is a genuine OEM part and is used for a variety of different small engine/outdoor lawn equipment. The return fuel line from the carburetor is installed through this grommet, which creates a seal to prevent future leaks and ignition issues. Over time and through exposure to fuel, the grommet can wear down, le...Read moreading to cracks, tears, and missing pieces. If you notice fuel is leaking during operation, or are having issues with starting the engine, this grommet may be the cause. Depending on your model, installing the return line in the grommet and then installing both together in the fuel tank may be easiest, rather than installing them separately.

The fuel pipe/fuel line assembly is a genuine OEM parts kit used in gas-powered outdoor equipment with dimensions of 5mm x 160mm. It includes a pipe or line, which carries fuel from the tank to the carburetor, and a rubber grommet which holds the fuel line in place. The grommet also has a flange that prevents it from being pulled into the...Read more body of your equipment. Over time the grommet may wear down and the fuel line can become brittle and crack causing fuel leakages and difficulty starting or running your equipment. Therefore, it is important to routinely inspect this assembly and replace it when it shows signs of wear. Before your repair, drain the fuel for your safety and to prevent contaminating the fuel tank. To install a new fuel pipe assembly, simply pull off the old grommet and detach the fuel line. Carefully insert your new fuel line into the new grommet and connect the line to the carburetor and the fuel filter inside the fuel tank on your equipment.

The cleaner element, also known as an air cleaner or air filter is a genuine OEM replacement filter for use in lawn and garden equipment. The filter is made of foam and is housed in a plastic/metal frame. Note that the filter cover and the frame are sold separately. The filter regulates air flow to the engine and prevents dirt and debris ...Read morefrom entering the engine and potentially damaging it. Over time the filter may become clogged or may tear resulting in black smoke coming from the engine, difficulties starting the equipment, and reduced overall performance. To replace the air filter, remove the filter cover and pull out the element. Install the new filter into the housing and reattach the filter cover. To keep your equipment functioning efficiently, you should regularly inspect the air filter and clean or replace it as needed.

Also known as a priming bulb, this OEM replacement part is an individually sold rubber primer bulb. Since it is made of rubber, it will eventually lose its elasticity and crack or break,and need replacing. It is designed for use with a variety of different small engine equipment and is also known as a purge bulb. Pressing this primer bulb...Read more forces fuel through the fuel line and into the carburetor from the fuel tank. Once the carburetor is has a sufficient level of fuel, any excess fuel will be forced back into the fuel tank through the return line attached to the carburetor. If your primer bulb has a darker appearance or has lost its elasticity and does not return to its original shape, it means the rubber will likely soon crack, which will lead to fuel leaking into the engine and ignition system. To replace your primer bulb, simply remove the outside cover and primer bulb cover and replace the bulb within its housing.

This replacement foam air cleaner element is sourced directly from original equipment manufacturer. It is a genuine item commonly used with Tanaka handheld lawn and garden equipment. It is helps to filter out dust and debris from contaminating the engine. This foam filter is sold individually. Please note, the filter cover and the base ar...Read moree both sold separately. Replacing this element is a simple task that does not require any tools. • Remove the cover knob • Take off the cover and replace the filter element • Reassemble and test the equipment

This is a genuine OEM replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It will at sometime become clogged and restrict the fuel getting to the carburetor,and will have to be replaced. We do have an article and vide...Read moreo on How to Replace the Fuel Filters in Your Outdoor Power Equipment.. You can see this by going to the front page of our site and clicking on Repair Center.

This tank cap assembly seals the fuel tank of your lawn equipment, preventing leaks and contamination. A broken cap may be cracked or loose, causing fuel leakage. If not replaced, it can lead to clogged fuel systems and engine issues. To remove the cap, turn off and cool the equipment, then twist and lift it. This OEM-certified replacement part is sold individually.

This item has been OEM sourced to ensure a high level of quality. The clip is intended to be used with trimmers and blowers from Hitachi and Tanaka. The metal clip is part of the fuel system. The clip is used to fasten the fuel filter and the fuel line assembly. This part is priced as an individual replacement part.

This filter cover is an OEM replacement part supplied by Tanaka. It is used in machinery such as saws, edgers, trimmers, engines, and drills. This part provides a cover for the air cleaner of the machine which prevents debris from contaminating the engine. It is made of plastic and should be replaced if it is broken or lost. Please note t...Read morehe foam filter is sold separately as part 6690365. However, the bolt (part 6698730) is included.

This fuel tank is an OEM replacement part sourced directly from the manufacturer. It is commonly used Tanaka grass trimmers. This white tank contains the fuel that powers the machine. It includes three mounting tabs, one fuel inlet, and one fuel outlet. This part is made of plastic, and it should be replaced if it is cracked or punctured. A wrench is needed to replace this part that is sold individually.