MOBY (X 26cc) Tanaka - Overview

This OEM replacement part is used to pump fuel from the tank to the carburetor in order to start the engine. It may also be referred to as a Primer Bulb. It is made of durable black plastic and is sold individually. This part will be found in various locations, depending on your model; refer to your owners manual to locate it on your mach...Read moreine, but is commonly found on the side of the air cleaner or carburetor. To complete this repair, you will need a screwdriver. The Purge Bulb needs to be replaced when it is cracked or damaged. It will become fatigued through regular use and may leak fuel when it is malfunctioning. Customers rated this repair as Easy.

This individually sold grommet is a genuine OEM part and is used for a variety of different small engine/outdoor lawn equipment. The return fuel line from the carburetor is installed through this grommet, which creates a seal to prevent future leaks and ignition issues. Over time and through exposure to fuel, the grommet can wear down, le...Read moreading to cracks, tears, and missing pieces. If you notice fuel is leaking during operation, or are having issues with starting the engine, this grommet may be the cause. Depending on your model, installing the return line in the grommet and then installing both together in the fuel tank may be easiest, rather than installing them separately.

The fuel pipe/fuel line assembly is a genuine OEM parts kit used in gas-powered outdoor equipment with dimensions of 5mm x 160mm. It includes a pipe or line, which carries fuel from the tank to the carburetor, and a rubber grommet which holds the fuel line in place. The grommet also has a flange that prevents it from being pulled into the...Read more body of your equipment. Over time the grommet may wear down and the fuel line can become brittle and crack causing fuel leakages and difficulty starting or running your equipment. Therefore, it is important to routinely inspect this assembly and replace it when it shows signs of wear. Before your repair, drain the fuel for your safety and to prevent contaminating the fuel tank. To install a new fuel pipe assembly, simply pull off the old grommet and detach the fuel line. Carefully insert your new fuel line into the new grommet and connect the line to the carburetor and the fuel filter inside the fuel tank on your equipment.

The cleaner element, also known as an air cleaner or air filter is a genuine OEM replacement filter for use in lawn and garden equipment. The filter is made of foam and is housed in a plastic/metal frame. Note that the filter cover and the frame are sold separately. The filter regulates air flow to the engine and prevents dirt and debris ...Read morefrom entering the engine and potentially damaging it. Over time the filter may become clogged or may tear resulting in black smoke coming from the engine, difficulties starting the equipment, and reduced overall performance. To replace the air filter, remove the filter cover and pull out the element. Install the new filter into the housing and reattach the filter cover. To keep your equipment functioning efficiently, you should regularly inspect the air filter and clean or replace it as needed.

This is a genuine OEM replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It will at sometime become clogged and restrict the fuel getting to the carburetor,and will have to be replaced. We do have an article and vide...Read moreo on How to Replace the Fuel Filters in Your Outdoor Power Equipment.. You can see this by going to the front page of our site and clicking on Repair Center.

This tank cap assembly seals the fuel tank of your lawn equipment, preventing leaks and contamination. A broken cap may be cracked or loose, causing fuel leakage. If not replaced, it can lead to clogged fuel systems and engine issues. To remove the cap, turn off and cool the equipment, then twist and lift it. This OEM-certified replacement part is sold individually.

This item has been OEM sourced to ensure a high level of quality. The clip is intended to be used with trimmers and blowers from Hitachi and Tanaka. The metal clip is part of the fuel system. The clip is used to fasten the fuel filter and the fuel line assembly. This part is priced as an individual replacement part.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Tanaka and Hitachi lawn and garden equipment. The purpose of this gasket is to provide an air-tight seal for the carburetor, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. ...Read moreIt is a high-quality item that is made of durable composite material and is sold individually, over time it may wear out and begin to crack eventually requiring a replacement.

It is a genuine part that is supplied by the original equipment manufacturer for Tanaka handheld lawn and garden equipment. The purpose of this assembly is to allow air into the fuel tank so that a vacuum is not created when the fuel is being fed through the fuel line. It is an identical replacement for a missing or a faulty part that was...Read more installed on a new unit. To ensure the proper replacement procedure, refer to the appropriate diagrams for your model. It is a high-quality air vent which is made of durable material and is sold individually. Replacing it is a simple task that should not require any special tools. Disconnect the old vent from the hose and connect the new one.

This piston ring is a small metal ring in an engine that seals the gap between the piston and the cylinder wall. It prevents the escape of combustion gases and maintains compression. When damaged, oil will leak into the combustion chamber and cause performance problems within the engine. You may experience rough running and a loss of powe...Read morer or notice that blue smoke is coming out from the exhaust when this happens. To remove the piston ring from your machine, you need to detach the piston from the engine. Using a small screwdriver, pry the damaged piston ring away from the piston and slide it off. Be careful not to scratch the piston nor the cylinder walls during this process. You may also need to compress the ring to remove or install it onto the piston. Please note that this authentic OEM replacement part is sold individually. It is recommended to replace your piston rings all at once as they wear out at the same rate, so be sure to read your user manual and confirm how many rings your machine will need.